bucketmouth64 Posted October 24, 2010 Share Posted October 24, 2010 I was cleaning my 870 today and there are a couple of spots I could see that have powder deposits inside the barrel. I tried for about 1/2 hour trying different ways to get it out but no luck. I used the wire brush and cleaning pad wrapped around it soaked with Hopps going up/down and twisting. Any suggestions how to get this stuff out of the barrel. It's really annyoying seeing this when I look down the barrel. Quote Link to comment Share on other sites More sharing options...
walleyehunter80 Posted October 24, 2010 Share Posted October 24, 2010 the method you mentioned is how i do it, not sure why yours wont come out Quote Link to comment Share on other sites More sharing options...
magnum mike Posted October 25, 2010 Share Posted October 25, 2010 If you are using a brass brush, try a stainless steel brush. They are much stiffer & sharper but won't harm the bore. Quote Link to comment Share on other sites More sharing options...
carpshooterdeluxe Posted October 25, 2010 Share Posted October 25, 2010 plug the barrel, fill with solvent, let sit for a day, then scrub it out. Quote Link to comment Share on other sites More sharing options...
Notcho Posted October 25, 2010 Share Posted October 25, 2010 Probably needs to be polished out by a gunsmith, most likely melted wad stuck to the bore. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.