MILLER TIME Posted July 6, 2010 Share Posted July 6, 2010 I just replaced my front outer and inner cv boot. My question is can I use just a reguler hose clamp and wrap electrical tape around it or do I have to use the clamps that come it. (I broke one of them). Thanks Quote Link to comment Share on other sites More sharing options...
Macgyver55 Posted July 6, 2010 Share Posted July 6, 2010 Hose clamps tend to stick out too far and catch grass and weeds and cause them to wind up on the axle. In a pinch a hose clamp would do but they are also too wide for the area that they clamp. If you were a bit closer I'd give you one, I have a few extras. Quote Link to comment Share on other sites More sharing options...
MILLER TIME Posted July 7, 2010 Author Share Posted July 7, 2010 Thats what I figured. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
4wheelingmama Posted July 7, 2010 Share Posted July 7, 2010 miller time- since you're in Marshall check with Action Sports. They should be able to get you one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.