kerryd15 Posted November 2, 2009 Share Posted November 2, 2009 what is the carpet glued down with? how do i remove the carpet to add another pedistal base? do i need to coat the new hole i drill with epoxy? Quote Link to comment Share on other sites More sharing options...
marine_man Posted November 2, 2009 Share Posted November 2, 2009 Not sure of your setup, but you should be able to use a hole saw to cut the carpet and the plywood underneath. No need to epoxy the carpet, or, put another way, most dealers don't re-epoxy the carpet after installing a new pedestal base.marine_man Quote Link to comment Share on other sites More sharing options...
MIKE IN lINO III Posted November 2, 2009 Share Posted November 2, 2009 That's what I did when I replaced my wood floor. Hole saw and mount the bracket right on top of the carper. No sealer. Good Luck, Mike Quote Link to comment Share on other sites More sharing options...
kerryd15 Posted November 4, 2009 Author Share Posted November 4, 2009 thought i would have to get down to the wood for the bases. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.