Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Ice-Bonz by silstar


Jig stick

Recommended Posts

Don't waste your money! I think they run like $19.99 a combo (possibly $14.99) Do yourself a favor and spend an extra $10-$15 plus tax and buy yourself a Genz rod. Then take a summer reel and electrical tape that sucker on there....now you are talking.

It's not a bad combo for starters getting into ice fishing, but if you are an avid, seasoned ice-fisherman....please follow the recipe above.

Link to comment
Share on other sites

Gander in Tonka had the reels on close-out last summer. I had bought a couple before and liked them so I bought ten of them. I gave them to several people as gifts. One of them only lasted a couple of days before it ended up on the bottom of Waubay Lake. The rest of them worked great as panfish reels. For the money, a good reel.

Link to comment
Share on other sites

They Ice Bonz reels have a very nice drag. That is very important when catching big panfish and bass with 1 lb line. Don't hesitate to buy them.

------------------
-Zach Schuler

Link to comment
Share on other sites

Matt,
Thanks for the info. I'm a transplant from the west coast so everything I know about ice fishing, I've learned from my father-in-law since I've been here. I never heard him mention 'noodle rod' but he did set me up with what I needed to learn the sport (is ice fishing a sport or an excuse to drink with your buddies?). He taught me how to fish for sunnies using a 'spring bobber' and now I want to focus on walleye and possibly pike. I bought a bunch of Angel Eye & Glow Devil lures so now I just need a couple of ice rods for these types of fish. Any suggestions?
Dobber

Link to comment
Share on other sites

I think the reel makes a big difference. I use the Iceman rods, and never had any problems with them. Cheap with slip graphite reel holders on them. I use my panfish ultralight Shakespear reel, which is quieter, smoother, and doesn't gunk up nearly as much. Silstar reels are in my opnion cheap and dump. Even South Bend has proved to be more reliable. Shakespear makes some nice, very small ultralight reels however.. for about $14 a piece. Pair that up with one of those $7-9 Iceman rods and your not spending that much more, for a much better, smoother Aluminum ball bearing ultralight reel to boot.

Link to comment
Share on other sites

A noodle rod is basically a really flimsy rod with not too much backbone. You can use them for deadsticking for panfish, the tip bends real easy and can be a strike indicator. Not too much hooking power in a noodle rod but they work ok for crappies and gills on occation. Not a top choice for jigging but when used in combination with a jigging rod they work out ok. Also feels like you have a lot big bigger fish on your line then you really do wink.gif

Good Fishin,
Matt

[email protected]
Catch-N Tackle
MarCum

Link to comment
Share on other sites

Hey Capt. I mounted one of the ice bonz on a South Bend micro 30" rod with 2Lb test ice line,And put a tiny genz pounder on it.This is gonna be one hell of a crappie rod! ><sUMo>------------><> Jig Stick

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.