Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Dog bed


French Spaniel

Recommended Posts

Just thought that I would offer a little tip that has worked well for me. I have six hunting dogs and 4 kennel runs (indoor and outdoor). Have always been looking for something that would work well for dog beds.

Have experimented with different models from various companies. Most are for one dog per run. The best thing I found is a sled used to pull ice fishing equipment. I found mine for 30 some bucks at Fleet Farm and saw the same thng at Cabela's.

My outdoor runs are 10 x 5 and the indoor ones are 5 x 5. The bigger sled is just short of 5 feet and around 2 foot wide. The smaller ones are almost square. 3 feet by 2.5. Found them in the Fleet Farm cement areas. Were placed there for those who wanted to hand mix cement.

I also like the cedar wood chips better than the curly cedar strips because it stays in the sleds better. I have a couple larger and two smaller ones. The larger ones will easily fit two dogs. They work great.

You can also drill holes in the bottom runs of the sled to help any moisture drain out. Make sure you drill from the inside to outside. Hope this helps anyone who was in search of a stury dog bed. French Spaniel

Link to comment
Share on other sites

This message is for French Spaniel. I'm assuming you are a French Brit owner? I just put down a deposit for a French Brit pup for later this winter. Just curious of your opinion of this dog? I did a lot of research before deciding on this breed. I actually do not hunt much anymore but this dog will have plenty of cabin/water time and get plenty of exercise otherwise. It will also be a house dog. Any thoughts?

Thanks

Link to comment
Share on other sites

Hi Ripper,

Actually we have French Spaniels which are different from French Brits. Brittany Spaniels actually came about from breeding of French Spaniels and Setters hundreds of years ago. The French Spaniels is a little larger than a Brit. They are more setter-like.

I actually haven't hunted with a French Brittany but I have heard many good comments on them. I'm sure you will enjoy your pup. Glad to see you are making a house dog out of him or her. I always think a dog listens better when they are a house dog. They tend to want to please you more.

If you want to see what French Spaniels look like go to (no unauthorized links) There are links on the side in the photo area that shows the dogs in various situations.

Link to comment
Share on other sites

Thanks for the info. I did a google search and found a link that I think you must have meant? I read the "magazine article" and I'm guessing it was you the wrote it? Never heard of the breed before, but a great looking dog! Thanks!

Link to comment
Share on other sites

Thanks, yep ... that was me who wrote the article. We just love the French Spaniel but I would never say they are better than other types of hunting dogs such as your Brit. Every hunter has a breed they like and will swear by. I guess ours is the French Spaniel. They have an easy personality and hunting style that a lot of folks like.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.