Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

DNR Issues Advisory


Tofishem

Recommended Posts

"DNR issues ice advisory to fish house owners (2006-01-27)

With unseasonably warm temperatures adversely affecting ice conditions across the state, the Minnesota Department of Natural Resources (DNR) is advising winter anglers to check the ice around their fish houses and if conditions warrant it, to consider removing them while the ice is still strong enough.

The DNR is particularly concerned the larger wood and metal fish houses commonly left on the ice overnight can melt down into the surface, making removal very difficult if the ice re-freezes, or sink if ice conditions continue to deteriorate.

"With daytime temperatures above freezing for several weeks, and in the mid-forties in the southern half of the state on Friday, people are going to have to be very careful if they plan on any motor vehicle ice travel," said Tim Smalley, DNR water safety specialist. "Even though it may still be twelve or more inches thick in some locations in the northern part of the state, the quality of the top layer of ice has degraded as far as weight-bearing capability so you need to check the ice thoroughly every day. Nobody wants to die for a crappie."

Owners are legally responsible for removing their fish houses and any debris left after chopping them out of the ice. Littering penalties can include fines or civil penalties up to $2,000.

Anyone who ventures out on the ice still needs to check safety conditions before going out to their fish house, especially with a car or truck.

Ice anglers and others who venture out on the ice are advised to call a local bait shop or a resort on the lake where they are heading to determine if vehicle use is advisable. Some DNR officers are recommending the use of ATVs to move fish houses rather than cars or trucks.

DNR conservation officers report "iffy" and "spotty" ice conditions on some lakes as far north as Bemidji with slush and ice thicknesses well below average.

All lakes in Anoka and Rice counties have been closed to car and truck travel by their respective sheriff's offices due to deteriorating ice conditions.

According to state law, anglers have until Feb. 28 in the southern half of the state and March 15 in the north before they are required to have their fish houses off the ice by no later than midnight each day and not put them back on until 6 the next morning.

"In normal winters we would have another six weeks, but this has been anything but a normal winter," Smalley noted."

Bruce

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.