Where is the Aerator Timer on the Lund Pike 16 Found??

[TSCTSC]

My automatic switch for the aerator is not working altho the manual switch is working. I think it may be the timer. Where is it? I have looked under the console and switch and it is not there. I have looked near the live well and do not see anything like a timer near the pump too.

[get-the-net]

Did the auto switch for your livewell previously work? I've got a two way switch in my pro-v but a timer was never hooked up before. I have one in there now.

[TSCTSC]

Yes...it did previously work. Now it is not working. The manual switch works tho'. Wat is the deal now?

[get-the-net]

It should be near the switch or the timer could be built into the switch itself. I would suggest buying a new switch and timer and hooking that into the existing wiring. Sorry I don't have a more definate answer. That's the most sure-fire solution I can think of.

[Satchmo]

The timer should be behind the dash. It looks like a small canister about the size of a film container and is ususally red or white. It simply plugs in to a timer harness and is very easily replaced. I would check to make sure you have power to the timer side of your switch before replacing the timer module. Good luck, Greg.