Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

pickled pepperoncini recipes


Recommended Posts

I Use the same recipe as I do for fridge pickles, so yeah it won't last that long but still tasty.

In a sauce pan combine
A few slices of onion
1 cup white vinegar
2 cups water
3 teaspoons salt - you can go 50/50 on the liquid or more or less salt. This is what I settled on and its easy to remember with the 1,2,3...
I dont let this boil - just get up to a decent temp(starting to steam a little) looking to dislove the salt and soften the onions a tad while releasing some onion flavor. Heres the key to cripsy - Let this brine cool completly!
Ok on to the cukes. I use "straight 8s" and "pickling" ones. No real preference. Usually have a mixture in each jar...
The smaller and fresher the cuke the better. I try and make em the day they are picked. Most batches have a mixture of slices, rings, halfs, and baby wholes in em...
Also needed...
3-4 peeled cloves of garlic
1 teaspoon pickling spice
1/4 teaspoon crushed red pepper
1 or 2 heads of fresh dill - when not available i'll use 1/4 teaspoon of the stuff in the little shakers
This makes roughly a quart to a quart and a half sized container. I have a bunch of the quart and a half glass jars that are my favorite. All the diff size containers is a pain! I have a plastic one that I use alot that is a pint and 5/8th's. My brine ratio always stays the same but i'll adjust other stuff as needed. Its not an exact science and can be played with to suit your tastes...
Add all the stuff to the container. I dont pack the cukes tight. Full but I want things to move around a bit when topped off with the brine and shaken around...
Put em in the fridge and patiently wait two days, shake them a little after a day if you remember...

 

 

 

 

This is Dark Cloud's recipe.  So obviously use peppers instead of cukes......or for a bonus do both and enjoy!

 

Link to comment
Share on other sites

I am surprised there were not many replies to this topic.  I have been making pickled banana peppers for a number of years now using a vacuum sealer rather than boiling the filled jars & lids.  No matter what I did, boiling the jars always made for soft peppers.  My recipe is below.  However, searching the internet for banana pepper recipe's everyone says to boil (or process) the jarred peppers for 10 minutes due to botulism concerns.  My grandmother never did that when she made pickles or peppers.  She basically followed the second recipe below that did not use a vacuum sealer.  I have not made the peppers under the second recipe, but was wondering if any others make peppers without the water bath.

Both are 3:1 (water:vinegar), however there is more salt in the second recipe.  Anyone else care to share their recipe for crispy pickled banana peppers?

 

Vacuum Sealer Pickled Peppers

Mix: 3 cups of cold water(filtered or spring works best) per 1 cup of white vinegar
In each jar:  Add 2 toes of garlic, 1 tablespoon of canning salt, and 1/4 - 1/2 teaspoon of alum.
Stuff jars with peppers cut in half (or however you choose)
Fill with brine to cover peppers, add about a teaspoon of corn oil to the top of each jar before you lid and seal them.

Seal with vacuum sealer attachment.

should be ready to eat in 1 month or so.

 

Pickled Peppers Without Water Bath

You need to do a 3 to 1 ratio of vinegar and water so 1 cup white distilled vinegar to 3 cups water and 3 tablespoons pickling salt. I believe these are the bare minimum for salt and acidity for safe canning. I do pickled jalapeños. I cut them in slices ( if you don't like them too hot remove the seeds with a filet knife before slicing them. In the sterilized canning jar stuff two cloves of garlic, 3 heads of dill ( can substitute dill seed or dried dill) and cram full sliced peppers. Boil the water, salt and vinegar. When it comes to a boil pour into jar leaving 1/8 inch head space at top and seal. Leave these on the counter till they cool. You should hear the tops pop when they seal. Remove the bands and store for a minimum of 2 weeks to get the dill flavor. Check periodically that the top are still sealed. This will keep the peppers crunchy by not reprocessing them in hot water. I have gone at least two years without any problem.

Link to comment
Share on other sites

Both of these sound good! I haven't been on much and I did a simple recipe since this was my first time of 1 3/4 cups of apple cider vinegar, 2 1/4 cups of water, 2 tablespoons of canning salt, a garlic clove per jar and a bay leaf per jar. Boil the vinegar water and salt and pour over the peppers while hot. And let sit for 3 weeks. Your choice to do a water bath or not. I did not do the water bath and I think it should be ok.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.