Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Panfish Pains


Recommended Posts

On quite a few local lakes, the walleye bite is really strong on leeches/crawlers. The problem is the pesky panfish (sunnies/perch/rockies) are constantly pecking away at the same depths I have been finding the eyes. Really annoying. We have had a few double where 1 guy gets an eye, the other a tiny sunny. Would love to go more than 10' without the pannies ripping of my expensive bait. Even with just a plain black hook those buggers are there. I suppose I could go back to minnows or start pulling plugs, possible gulp, but man I just love rigging live bait. Anything that I am missing to avoid the panfish???

Link to comment
Share on other sites

I would say that unfortunately, you will have to put up with the pesky panfish if you insist on live bait rigging this time of year.  Some options are try working paddle tail minnows slowly along the edges with and without a clothespin spinner attached, cast shadraps or countdown minnows along the edges, try lipless rattle baits on a slow steady retrieve.  Depending on the depth and bottom makeup, rip jigging feather jigs or jig and plastic combos may work well and draw reaction strikes while keeping the panfish at bay.  These tactics will eliminate alot of the pesky panfish but not all of them yet still take aggressive walleyes.  Chances are the walleyes are there to feed on the small gills and perch which makes cranking a great option. If you are steadfast in using livebait rigs then try working them nearer low light periods when the panfish are apt to be slightly less active and the walleyes more active. 

Tunrevir~

Link to comment
Share on other sites

I would say that unfortunately, you will have to put up with the pesky panfish if you insist on live bait rigging this time of year.  Some options are try working paddle tail minnows slowly along the edges with and without a clothespin spinner attached, cast shadraps or countdown minnows along the edges, try lipless rattle baits on a slow steady retrieve.  Depending on the depth and bottom makeup, rip jigging feather jigs or jig and plastic combos may work well and draw reaction strikes while keeping the panfish at bay.  These tactics will eliminate alot of the pesky panfish but not all of them yet still take aggressive walleyes.  Chances are the walleyes are there to feed on the small gills and perch which makes cranking a great option. If you are steadfast in using livebait rigs then try working them nearer low light periods when the panfish are apt to be slightly less active and the walleyes more active. 

Tunrevir~

This is good info. I have pretty much given up on livebait through most of the summer here in the southern part of the state. Too many panfish and sheephead. 

Link to comment
Share on other sites

Or just get spinners and troll chubs. The perch and panfish will still attack them but they won't rip them off hooks

I've used the GULP! Crawlers on harnesses with very limited success. Done better with the Gulp leeches

Edited by tacklejunkie
Link to comment
Share on other sites

Or just get spinners and troll chubs. The perch and panfish will still attack them but they won't rip them off hooks

I've used the GULP! Crawlers on harnesses with very limited success. Done better with the Gulp leeches

I haven't had good luck with Gulp crawlers either. But I've seen Gulp leeches outfish live leeches side-by-side enough to become a believer.

Link to comment
Share on other sites

Ugh, yeah that is really annoying. And somehow those tiny panfish will manage to swallow the hook while the walleyes will barely be hooked in the skin of the lip :P

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.