Slimdart Posted February 28, 2013 Share Posted February 28, 2013 I want to purchase one of these for this springs late ice season. I have found a couple that I like. Both rods say they can be switched from right handed to left handed. I have looked and cannot figure out how to do it. It seams that you are supose to turn the reel backwards to make it left handed. But that would mean you would be reeling against the drag and there would be no drag going in reverse just free spool. I want to make sure I can use it the way its intended before I purchase one. If you have any recomendations I would like to hear them. I would like to spend less than $40 on the combo if possible. Quote Link to comment Share on other sites More sharing options...
bee Posted February 28, 2013 Share Posted February 28, 2013 Remove the bearing turn it around and its done. Quote Link to comment Share on other sites More sharing options...
MN BassFisher Posted February 28, 2013 Share Posted February 28, 2013 It should be pretty easy to flip the reels, they are reversible. I just purchased a new 3wt fly rod and an Okuma SLV 2/3 that I will be putting on my St. Croix Legend. I'm hoping to get a few fish on it this weekend! Quote Link to comment Share on other sites More sharing options...
Slimdart Posted March 1, 2013 Author Share Posted March 1, 2013 Thats what I thought but you cannot flip the spool because the housing for the spool is solid on the right side of the reel. Flipping the reel backwords would eliminate the drag system because everything would be reversed. Reeling in you would reel against the drag and back reel would always be free spool. Quote Link to comment Share on other sites More sharing options...
bee Posted March 1, 2013 Share Posted March 1, 2013 Again remove the bearing reverse it and reinstall. Rotation is reversed. Left hand is right or visa versa. Lots of talk about this on this and other forums. Quote Link to comment Share on other sites More sharing options...
Rod Woten Posted March 1, 2013 Share Posted March 1, 2013 ...Flipping the reel backwords would eliminate the drag system ...That's why you have to flip the 1-way bearing in the spool. This should give you the general idea.... Changing retreive on Genz Spooler Ice Reel. Might be a few minor differences based on reel model, but essentially it is the same for all inline 1:1 reels.-Rod Woten Quote Link to comment Share on other sites More sharing options...
Slimdart Posted March 1, 2013 Author Share Posted March 1, 2013 Got it. Thanks for the help Quote Link to comment Share on other sites More sharing options...
ski_otter Posted March 2, 2013 Share Posted March 2, 2013 I just grabbed a 13 fishing fly style reel and switched it to right hand crank, do I need to switch a bearing?There's no click either way and drag seems pretty minimal just a bushing that seems to regulate the reel both ways at an even tension in both directions Quote Link to comment Share on other sites More sharing options...
amateurfishing Posted March 2, 2013 Share Posted March 2, 2013 i have the great folks @ thorne bros. change & set it up for right hand retrieve for me. when i buy them their. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.