Big Buddy Question

[MJBaldwin]

One of my ceramic pieces broke. Can someone please help me on how to replace it? I have already ordered the part just not sure how to put it in.

Thanks

[PierBridge]

It doesn't look to terribly difficult... just make sure you get the gasket in correctly and tighten everything up snug....

Here is the BB manual with a break down of the parts and the Mr Heater phone number if you need to call them...

http://www.mrheater.com/upload/newsletter/MH18B_BigBuddy_US_BL.pdf

1-800-251-0001

[MJBaldwin]

Update for whoever has to replace a ceramic tile I just got done taking it apart and it took a solid half hour once I figured it out it was fine to put back togther but man lots of things are connect which make pulling it apart a hassle!

But fixed it for 12 bucks and a little time better than 125 for a new one.

[lispeej]

Good to know it's a replaceable part. Thanks for sharing.

Update for whoever has to replace a ceramic tile I just got done taking it apart and it took a solid half hour once I figured it out it was fine to put back togther but man lots of things are connect which make pulling it apart a hassle!

But fixed it for 12 bucks and a little time better than 125 for a new one.

[topcat3820]

So, would you care to share how you accomplished it

[MJBaldwin]

Ill share how I did it I was thinking about taking pictures of it but never did. You basically have to take the whole unit apart

Plastic all comes off backs and front not hard if you remember where all the screws go just very tedious but hey for twelve bucks ill fix it instead of sending it to the landfill. Just wish they made things that would be able to be repairs more easily...