Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Muskies in wood?


Recommended Posts

Muskie water is scarce in my part of Iowa. I have never tackled a new lake anything like this and need some advice. The lake is a reservoir created by damming a few creeks that ran through deep ravines. The result is a very clear 170 acre lake that is 16 years old. 75% of it is very deep at 50'+. The remaining has steep shorelines. Most of the submerged tree tops are just a foot or less below the surface. The fishable water is a mine field and I use a trolling motor. The lake is notoriously pretty tough but gives up mid 40s muskie. Would you attack the wood? I can fish wood in 12'-40' deep water. I know the walleye and crappie anglers have far better success at night. But I'd lose $100 an hour worth of cranks. Just found the place and was able to drag bucktails over the wood. As an alternative there is also some 20 foot water with good weeds and no wood, but it is scarce. And it gets pounded. Presumably because it's less hassle. I have to give this lake a shot if I want to muskie fish. Just don't know if muskie like wood so I lack confidence.

Link to comment
Share on other sites

spinner . what lake are you talking about ? ( brushy ?) i'm no expert , but from what i have been reading on here and in articles the fish can and will use wood, suspend, relate to weeds, or any other type of structure that may hold bait fish. hopefully the experts will give you more details. del

Link to comment
Share on other sites

Del

It's name was recently changed to McMaster Lake. It is in a preserve called Snake Den Hollow near Victoria, Illinois. I have fished enough MN water to know you guys would likely pass it by. But it can give up nice fish for a very small lake.

Link to comment
Share on other sites

cool ! sounds like you have found a small gem ! i want to get over to brushy again. just haven't had the time or finances to get to minn. but once this year. my twins are seniors ; so i am paying for senior pictures right now ! sure cuts into my traveling funds! del

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.