Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Boat lighting


waskawood

Question

I do most of my fishing at night and need a way to light my boat. I would like two methods of lighting. One would be a soft light just to see stuff laying around the boat and then a mounted light that would be more intense for hook removal etc. Does anyone have any novel ideas? Thanks.

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

I made a light several years ago out of conduit, a SS bowl and a cheap light socket from the hardware store. You can buy 12V bulbs that are used in RV's. I just ran a cheap extension cord from the socket through the conduit and put a couple aligator clips on the end, I also put an in-line switch for turning it on and off. It's about 6' tall and lights up the water for 5-6' around the boat when it's on. This is one reason you only want to use it when necessary, it draws in the bugs.

Ole

Link to comment
Share on other sites

  • 0

I've seen 12 v lights similiar to door lights on RVs/campers as well as the rope lights used. Also, under the hood of my Chevy truck, there's a light on a cord that's long enough to reach to the back. I was at a garage sale and picked up a never-used similiar unit with a suction cup attachment. I had intended to put it on a 16-Lund-console that I was fixing up and never got around to it.

Link to comment
Share on other sites

  • 0

I took a piece of 10 foot conduit, put a 90 degree bend in it at seven feet and attached a old tail light with the lens remove, thus making it like a yard light. I wired both wires into a two way switch so I had the soft tail light and the other way I had the brake light. I put a bolt in the end of the conduit that fit into one of my oar locks. Really worked slick, fished with lighted bobbers, so as we got a bite we'd flip on low side of light and landed fish, then high side to remove hook and rebait.

Link to comment
Share on other sites

  • 0

Its easiest to run to some type of major boating supply location.. or even a gander mountain if you have one near by and pick up some cabin lights for the boat. I picked a couple up recently that are a simple white light with a rocker type switch on the bottom. 2 lights light up the entire floor of my 16' boat. These lights do provide plenty of light to unhook a fish, and you can leave power to them all the time because they are turned on at the light, not at a switch.

Another great lighting option if you do a lot of night fishing id to get some of the amber clearance lights for a trailer.. the 2 bulb models are best for this application.. 2 of these lights placed at strategic locations in the boat, and preferably not pointing at your eyes will provide nice light just to be able to *see* when night fishing, and they will not draw bugs too bad. You will have to put in a switch for these lights. These lights work great to *just leave on*.. they wont mess up your night vision if you place them properly.

If you mount both styles of these lights.. your light needs should be taken care of other than a spot light for motoring.

Another handy type of light to have in a boat is an automotive flourescent light.. these usually are very durable with a protective plastic case.. these will let you put light where you need it if the cord is long enough.. you might have to install a cig lighter type outlet to run them.. great light when needed, and very little current draw on the battery.. but they will bring in the bugs for miles... so you will only use them when needed.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.