Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Did'nt know where to post this.. ?? on propane tanks..


The Yeti

Recommended Posts

WallMart had a really good deal on exchange. I don't know if they still do or not. If you just want rid of them, the Hazzardus waste facility will take them.

Link to comment
Share on other sites

Wally world will take them, and they charge you nothing for the old style valve exchange, not to mention you get a new tank of propane for less than I could find a place to fill one, explain that to me...

Link to comment
Share on other sites

Wife took two of my old style tanks to wal mart in faribault, two new ones filled cost a little over $30. Before i get ribbed about her taking them in, she wanted me to grill and I told her we needed propane and she had to go get it if I was grilling wink.gifgrin.gif

Link to comment
Share on other sites

Please note that when you exchange your tanks your not nessessarily getting a "new tank". You could in fact be exchanging you fairly new tank for a tank that could be twenty years old.

There is a date stamp on all tanks. A tank needs to be recertified after twelve years and then every five years after that. Lets say you get into a pinch and have to exchange your tank thats only a couple years old. You get a tank that was made in march of '83. Now your up at the cabin or out on the ice and you run out. You head into town and all they do is refill them. They take a look at your tank and say they can't fill it because its expired! Know your day is shot.

This happens quite often so check to make sure unless you always exchange you tanks and then it won't be an issue.

Link to comment
Share on other sites

Airjer, you are off a little on your info right now. All tanks that you receive now are equipped with the new type valve (OPD) and our only three or four years old. Propane dealers that refill the tanks for filling stations and such will have to recertify the tanks that will become outdated. To be recertified, they visually inspect the tank for damaged valves, rust, and dents. They then stamp them again with the new date. Some dealers will repaint them also. If the tank is getting close to being outdated they will do this.

Link to comment
Share on other sites

You are a little off on your info luckyc. Occasional some tanks slip through with out getting the stamp. If it doesn't have the stamp it doesn't get filled! Also remember that the propane jobbers have been converting the older tanks with the non OPD valves to the OPD standards for over five years. Just because it has the new valve does not mean it is a new tank! So some of the older tanks are starting to come around for there recert. again. And then there are the folks that rarely use there tanks and have them in the garage (not a reccomended storage place) for a couple of years.

Yes the jobbers do a good job of making sure the tanks are up to par but there are several other factors that play in as well. I see expired tanks several times a week and more often than not the have the blue rhino or other exchanger label on them. We still get people bringing in there non OPD tanks to get filled and that law started 4/1/02.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.