Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Sled for Ice Fishing


IceAge@work

Recommended Posts

I'm a snowmobile novice but am starting to see the need to purchase one for future big lake ice fishing adventures. The four-wheeler I currently have works well on small metro lakes but for tooling around on Mille Lacs or LOTW I know it is not the ticket.

What kind of options should I be looking at and how do they improve the machine for fishing purposes. Brands and model suggestions are good just don't want it to get into a Ford vs. Chevy thing.

Also I see some of the ice fishing media types with these really elaborate racks & brackets and basket things. Is this all custom built stuff or is it commonly available after market items the general public can get a hold of.

And lastly new vs. used. I'm hoping to find a decent deal over the summer and curious if opinions are that hold over models might be the best value instead of a used sled.

Thanks in advance for any feedback.

Link to comment
Share on other sites

IceAge; This is a good time of the year to find a good deal on a sled. What price range are you looking at? I would suggest at least a 136" track with reverse and electric start. There are used sleds out there with less than 1000 miles, if they have been treated right, should be less than half price of new. Good luck.

Link to comment
Share on other sites

If I had the cash to buy an ice fishing specific snowmobile. I would get an Arctic Cat Bearcat in a heartbeat. Some of the Bearcats features that I really like are the 4 stroke engine, reverse, long & wide track, 2 up seat, luggage rack, and cat has the interchangeable rack system. And Cat just dropped the new T660 Turbo 4 Stroke motor into the Bearcat for next season!

Alot of these same features are available on other manufacturer's snowmobiles also so your not just limited to Cat.

I think in general, a 2 up seat is important as well as a longer track with a luggage rack. The rack makes a great spot to strap an auger down. The 2 up seat is great in case your fishing partner doesn't have a sled.

Link to comment
Share on other sites

THERE IS A SNOWMOBILE AUCTION ON SUNDAY MARCH 20 IN ZIMMERMAN,MN. STARTS AT NOON, but I would get there by 930 to really go through the sleds before hand. I have bought 3 sleds from there in the past 4 years. some really good buys.

to get there, go north on Hwy 169 out of Elk River to stoplight in Zimmerman, turn right- going east- go almost 3 miles, they should have signs pointing the way. good luck if you go.

Link to comment
Share on other sites

Get a little longer track for sure, it's no fun digging through piles of slush or deep powder if you go off a trail. Make sure to get a 1 and 1/4 minimum track depth or deeper. Studs will help on ice, take a look at any used sled for pulled through spots. Some of the newer sleds because they sit you up higher tend to be a little tippy. Almost any brand will work, ask your friends/co-workers if there is a nearby dealer who will do decent work at a reasonable expense/timely manner (if required)-or if you need spare parts. If the dealer lets you, they may have a spot to actually test ride one (or more). Bring a knowledgeable friend with if you can. Not as much to pick from this time of year, but there are some bargains if you look around.

A couple years ago, up on Saganaga, my friend and I marveled at all the old time sleds people bombed around on... not fast or pretty, they stayed on top of the snow where the new hotrods would tend to dig down.

Link to comment
Share on other sites

I was in your situation a few years back. I'm not a snowmobiler - I'm an ice fisherman who puts 300 miles a year on a sled and pulls hard-sided fish houses arond L.O.W. I don't know your financial shape, but I didn't want to put a lot of money in a sled that gets used so little. I second the suggestion to get one with a longer track. My older Polaris Sport GT (2-up)has a 141 inch track. I also love the carrier on the back so my expensive gear doesn't have to bounce around in the back of my otter sled. I personally wouldn't want more than 1" treads on the track since pulling a fish house with 1 1/2" studs puts a real strain on the track if you're digging into ice. I read and am told that the four strokes tend to overheat at low RPMs, but I can't say that for sure. I do know that I rarely go more than 25mph off-trail on LOW. My generic suggestion...buy an older sled (cheap) with the long track and carrier, use it as long as it lasts and then customize it to the suggestions as repairs are needed. I drive an old sled with a new moter and new (1")studded track and have about $2,000 in it and it should last me for years with a bit of preventive maintenance. I watch the sled adds fairly closely and think that finding a sled with all the good suggestions listed will be a very rare event. Buy cheap and make it suit your own needs.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.