Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Help with carp fishing.


Recommended Posts

I NEED HELP/ADVICE. I WOULD LIKE TO TAKE MY SON FISHING FOR CARP BUT I DON'T KNOW WERE TO GO THAT'S GOOD. OR WHAT I SHOULD USE FOR BAIT. I KNOW CORN WORKS. BUT HOW GOOD IS IT. AND WHAT TIME OF DAY IS GOOD. I HAVEN'T FISHED FOR CARP SINCE I WAS A KID. ANY HELP WOULD BE GREAT. I LIVE IN WEST ST. PAUL IF THAT HELPS.

Link to comment
Share on other sites

West St. Paul - you'd best look at the Mississippi. Look for slow water. That part of the Miss is full of awesome carp opportunities. Corn is a very good carp bait, but so are nightcrawlers. Sometimes they want the corn and sometimes the nightcrawlers. They also will take bread dough. Mix it with French Dressing for extra appeal. Good luck! Hope you and your son have a blast catching the worlds #1 game fish!

Link to comment
Share on other sites

I don't know the river that good. Were would be a good spot. I was thinking down off of Lilly Dale road under the high bridge. Or that lake that is down there.(Don't know the name of it.) Do you know any thing about it?

Link to comment
Share on other sites

SCUMFROG,
Not sure what the name of the lake is, but it's located on the west side on Rice St just south on HWY36. There is a park, picnic area, fishing pier and launch. There is the usual sunnies, crappies, bass, bullheads and CARP. Just north of the fishing pier about 75yrds you'll notice a small drainage pipe. In the morning and evening they'll be right there in the little channel. But if you cast out from shore there you pretty much can't go wrong. I'ld used corn or crawlers, on bottom or bobber.

Hope this helps and have fun
Good luck

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.