smalliehunter Posted July 6, 2013 Share Posted July 6, 2013 My bilge pump quit working both manual and auto. i started checking things and noticed both fuses were bad. I tried replacing fuse but right when i put the new fuse in it blew right away. What might the problem be? Quote Link to comment Share on other sites More sharing options...
h8go4s Posted July 6, 2013 Share Posted July 6, 2013 There's a short (bare red wire touching ground) either in the wiring between the battery and the pump motor or in the motor itself. If it's in the motor, you need a new pump. Otherwise, find the bare spot and fix it. Quote Link to comment Share on other sites More sharing options...
SpecialK Posted July 6, 2013 Share Posted July 6, 2013 I have heard of sand / debris buildup stopping the impeller. Take it apart and see if there is anything physically stopping it from spinning. Quote Link to comment Share on other sites More sharing options...
Kyhl Posted July 8, 2013 Share Posted July 8, 2013 I have heard of sand / debris buildup stopping the impeller. Take it apart and see if there is anything physically stopping it from spinning. That is my first thought. Check the impeller for debris first. I've seen line, and rubber bands wrapped around the impeller before.Generally, they just twist off with a short counter clockwise rotation. It's probably the simplest thing to check so I'd start here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.