Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Magical


Driftless

Recommended Posts

mdb.jpg

Ken Thompson and I met on an Iowa Fishing Board His handle on there is dryfly. I had made an open ended invitation to any of the members of that board to come fish with me some time. Ken is originally from Iowa but when he retired he and his wife moved down to San Angelo, Texas. This is where his wife is from. Ken usually makes a yearly trek up to Iowa each year to fish. He decided that 1,440 miles from Texas to Iowa was a long haul and what was 50 more miles to fish with me. We met in Gays Mills at 7am 9/17/10. We had talked prior and Ken was not a big fish guy. He much preferred numbers to big fish.

The day started early at the Gays Mills Gas Station. We drove by a brown trout stream on the way there. It was too tempting so we fished it for an hour. Ken had three bites and one brown to hand. I had four bites and three browns to hand. Off we went to my brookie stream.

mdy.jpg

The brookie stream was testing our patience at first. Ken hung up in a tree that I like to call "Ron" because Ron Benish has been hooked in it so many times I named it after him. While Ken was unhooking his fly I scored my first brookie of the day.

Ken tried a couple other flies with no success. We finally decided on a size 14 beadheaded pheasant tail. This was the last fly Ken had to tie on that day.

mda.jpg

We got to one hole and the brookies started to hammer his indicator. Before we knew it the indicator became loose and when the brookie slammed the indicator Ken set the hook and the indicator slid down the line and hooked 4 separate brookies this way.

On one hole Ken was casting and his back cast picked something up and the fly hit the water and it looked like Ken had changed to a dry. I made the comment to Ken: "Why did you change to a dry?" "The pheasant tail was still working well." Before Ken could respond a brookie hammered Ken's dry.

magicalwisher.jpg

It was "NOT" a dry. Ken had picked up a milk weed fuzzy on his backcast. This was only the beginning of the feeding frenzy. I counted 13 casts to that hole by Ken with 11 brookies landed.

mdg.jpg

Ken had never had a double before and the hole in front of us screamed "Double" Typically when i fish a double rig I am untying knots all day but I thought this was a "magical day" and Ken had driven all the way up from Texas and I was going to get his a double. Ken put a size 16 pheasant tail dropper on.

6 casts later Ken had 4 doubles and then casted another 6 casts and had hook ups on 5 others.

We fished until 1:30pm. I quit counting the trout at noon. We had many more to hand in the last one and half hours. The noon count was 130 brook trout between the two us. None of them were little either. Ken worked some Iowa magic by way of Texas.

magken.jpg

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.