Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

HELP!!!!


Recommended Posts

Ok here is the story. I fish the missisippi heavily above the paper mill dam in brainerd. Every year we know what to use for northerns (spinnerbaits) but this year they arent hitting them at all. But what i am noticing is that when we crappie fish with either white grubs or white tubes. we get a good bite going on crappies and then they stop all of a sudden and then we start getting huge northerns hitting our little plastics. We got lucky bringing in a seven pounder by hooking him in the cheek but everythng else is getting bit off or just plain coming off. WHY are they keying up on our little plastics and not our larger lures and what can I doto start getting these northerns to hit on something and have a chance landing it? one thought was to go to a lrger 4 inch bass tube or three inch grub or a kalin mongambo grub and swimming that through. ANy other suggestions?

Link to comment
Share on other sites

Switch to using a higher lb test fluorocarbon leader to prevent biteoffs.

I used triple fish brand 100% fluorocarbon line and use back to back uni knots to tie on some leader material, using in 25lb last year, 20lb this year. I've never had a bite off. Lighter test might work very well also.

I've actually been fishing northerns with soft plastics almost exclusively this year (until they went deep and I started using cranks). Northerns really love soft plastics even more at times than 'traditional' pike-y lures, and I believe they give a better impression of an actual food item than triggering a reaction or anger strike with flash, wobble, and pulsations.

The fact is that soft plastics give the impression of 'food' to visual predators, and pike will gobble them up if they are hungry.

Link to comment
Share on other sites

mainbutter is giving good advice. the same question came up on earlier post regarding walley. there is no "reason" why the pike hit your small plastics other than it was there in my opinion. my largest pike[23pounds] was caught while fishing for crappies. wierd how that works. smaller test florocarbon like mainbutter said is tougher than your conventional line. more expensive too. all you can do is try it. if it affects your action live with bite offs. good luck.

Link to comment
Share on other sites

I run into the same problem up north. I catch Northerns on everyting. Like reinhard1 said. They were there and so was bait. I have found small northerns will bite on anything. While big northern do not mind gulping down an easy meal. If i increase my retrieve the bigger ones keep away, it does not make sense for them to waist energy on a small meal.

Link to comment
Share on other sites

some posts bring back memories. talking about slow retrieves. i dont know how many out there that remember strip-ons. they kind of had their own bite proof design. we used suckers and when available smelt to troll with them and they were trolled just fast enough to keep the spinner going. i still have 4 of them still in their original package, and one ready to go. i'm going to rig one up with some of the new plastics minnows. old with the new. good luck.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.