Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

buying soil ph tester?


leechlake

Recommended Posts

Instead of just sending off soil samples, does anyone have knowedge on what types of soil testing equipment work accurately so I can buy one. I don't want some piece of lab equipment in my garage but if it's some simple equipment I may just buy one, thanks if anyone knows what I should be looking for. Heck, I could start testing fm'ers soil for free...

Link to comment
Share on other sites

Leechlake,

If you want information on do-it-yourself soil testing kits go to the Ben Meadows web site. They have a good selection. To do you any good you need a test which tests for N, P, and K, as well as pH. The link is as follows. [sorry, this link is not approved. Please click the "contact us" button below if you would like to have a link approved, thanks! (jlm)] pH is only one factor in soil fertility.

Take it easy

Link to comment
Share on other sites

Agree Beeber. pH is one of the easy tests to do. To analyze for P & K it takes a lot more expensive equipment like an atomic absorption and a mass spectrophotometer machines. These cost boo koo $ and that's part of why labs charge what they charge. Also, soil testing labs have standardized procedures so reagents used, drying, shaking, extraction and analysis times are the same. Past experience, the little LaMotte kits are OK for a kids science project but they're not particularly consistent for use on farmers fields. For instance, the type of analysis used on phosphorus varies with the pH. Running a Bray P1 test on a soil with a pH of 7.9 and an abundance of free calcium carbonate may give you a low phosphorus reading and cause you to overapply phosphorus. That's why you'd also run an Olson bicarbonate test. It's designed to give a true reading under those conditions. The lab we're using will turn around our samples in 3 days time and that's not bad.

Link to comment
Share on other sites

Dotch is right on all accounts. There are tests you can buy (Cheapest will run you around $80 but they are only as good at the person running the test. It's just like anything else in life if you really want to do a good job and be happy with the results spend a little money and get it done right. The professional testing services which are available (Local Ag service/University/Private contractor) will do an excellent job. I would keep it local though as they will be more familiar with what you are working with and be able get you better testing results and recommendations. Sending your samples to an outdoors company may work for you but I would be real cautious. If their test does not include pH, N, P, K, and I would even say S, then don't waste your time and money.

My two cents

Link to comment
Share on other sites

Getting the soil tested one thing but knowing what to do with if after you get the results in the imporant part I found out. So send your sample and they will get results and tell you what you should do to get your soil where it needs to be.

Link to comment
Share on other sites

If you're anywhere near Willmar there is a place called Eco-Agri labs that will do your soil testing and then they'll advice you on how many pounds of fertilizer you need to put on depending upon what crop you're planting.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.