erik-the-great
-
Posts
49 -
Joined
-
Last visited
Never
erik-the-great's Achievements
-
a bad day or week or month of fishing is still better than any good day of work!!!!!!!!!!!!!!!!!!
-
i agree with the riverrat with what he said but i would also shoot as many as they will let you, i bought a mattews mission 1/2 the price of all the pricy bows out there
-
What have you cooked on your heater/cooker?
erik-the-great replied to hoggs222's topic in Ice Fishing
every yr we stay up at lotw over the new years holiday and we have cooked ham,turkey,primerib,steak,just about evrything you can think of on the stove or in the oven or on the barby -
Wheel house? Do i use metal studs or woods and why?
erik-the-great replied to ratherbefishin's topic in Ice Fishing
i would not use a skil saw to cut the pro rib because it will leave little pieces of metal on the good metal causing it to rust the good metal i have always just used a good tin snips and where a good pr of leather gloves -
What sights do you guys recommend?
erik-the-great replied to MUSKY18's topic in Archery - Bowhunting
i still like the single pin in the center good to 35yrds thats good enough for my target practice and the hunting that i do -
Collapsible permanent fish house plans
erik-the-great replied to Professional Edge's topic in Ice Fishing
i dont have any pics but i have seen that same idea that you are thinking of, this guy used 4 inch door hinges that you can take out the pins then he made the walls and the floor then he put up the ceiling the put the pins in and you have a perm fish house that is portable he used wood 2x2s and 1/4 inch plywood and put if all on a snow cat trailer to haul it is was 8x10 good luck -
Wood vs aluminum studs in a wheelhouse--need help
erik-the-great replied to J.Iverson's topic in Ice Fishing
wood is a lot easier to work with and they dont sweat or condisate -
i work for a nation wide telephone company
-
i had the same trouble, i have a 16000btu empire vent free that has a thermostat and had nothing but trouble now my father in law has the same heater but does not have the thermostat and he didnot have any trouble the only thing i can figure out is that he is pulling lp all the time causing the reg or lp not to freeze up
-
speaking of looping batteries together we used 6volt golf cart batteries pos side to the neg and use other neg and pos we got 23 hours of use out of them on a full charge looks very nice inside you did a nice job on building it
-
i used 6x6 green treat posts for my 28 footer that i pull with my f-150 nick from zipple bay told me that i should have oak posts they are alot harder and skid easier?
-
New wheelhouse...finishing questions
erik-the-great replied to mediocrates67's question in Equipment-Expert Information*
we had a lot of trouble with the regulator freezing up on the 100# we ended up hooking up a 20# in the house that lasted 2.5 days we have a empire 16000btu vent free heater with a thermosat never had any trouble with the 20lb in the house and the reg -
if you set the skew for 105-108 and use a compass you should get something i always get 110 first and 119 is just 2 degrees to the right and down a click on the scale on the mounting bracket,also make sure that your mounting bracket is level good luck when i set up my dish i use my mother in law and she yells nothing yet
-
nothing but powder around here with 24 inches plus the wind factored in helped the kid dig out the snow cat most of yesterday
-
roads are good from trf to warren i think they would fine to i-29 then get on i-29 and head to fargo to get on i 94 and you should be good to go