Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Lake Winnipesaukee Fishing Report


Tim Moore

Recommended Posts

The fishing has on Lake Winnipesaukee has been insane this season. The white perch bite is off the hook and the average size of the fish seem bigger than ever. My clients and I have been having huge success with a white w/orange spot Epoxy Drop. I really didn't expect this lure to work so well for whites since they rarely hit anything besides smelt or a swedish pimple, but they seem to love this jig.

I am finding the perch in 27' - 32' of water on inside turns and breaks. Drilling a second hole for the vexilar has been key since the schools never hang around for long. This way I don't have to waste time removing and replacing the transducer from the hole. White perch swim in wide circles when they are hooked and will wrap you up every time.

Most of the bays on the lake have 15"+ of ice. Most of the rest of the lake has around 12" except the broads (the largest and deepest open section of the lake) which still had a bit of open water on Tuesday. With single digit temps during the day and below zero at night I don't expect that open water to last long.

Here are some images from recent trips for your viewing pleasure.

TimnJack.jpg

PerchClose.jpg

IMG_1800.jpg

IMG_1799.jpg

IMG_1796.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.