Ode
-
Posts
24 -
Joined
-
Last visited
Never
Ode's Achievements
-
My trim gauge on the dash of my pontoon is erratic at low speeds, but works fine at top speeds. Anybody have any suggestions as to what to check? Thanks, Ode
-
I will have to do some measuring and see if they are long enough. I have a F-350 and sits quite high, was wondering if it may be too steep. I will measure and get back to you. Ode
-
How long are the folding ramps?? Can you explain "A little bent?" Thanks
-
Valv, You have e-mail coming. Ode
-
I also have the fishmark 320 and love it. Very good for the money.
-
Thanks for all the replys, Got the boat out of storage and went to work on it. Found out the floor was not rotted, but a cross brace came loose. Was able to get in there from the back and secure it. I was surprised to see there were no screws in the piece that had come undone. I wonder if the brace was glued and came loose? I know it won't come loose now. Thanks to all who helped me with this problem. You guys and gals on this site are very helpful. Ode
-
Hey Polar Bear, Thanks for the info. I really appreciate the input. Sometimes I just need a positive reply to get me going on a project like that. I will look at doing it the same way you described. Was the old carpet hard to get up??? Ode
-
Gibby, Thank you for your reply. I see there is a place in Wisconsin that does this kind of work, but was hoping for someone closer. I guess the hunt is still on. Ode
-
Any of you people out there know who does boat floor repair? I am located in west central Mn. My floor is getting spongey in the backend and have noticed some supports are loose. Any info would help. Oh, may need new carpet also. Thanks, Ode
-
Scupper, Thanks for the information. I did this completely wrong, I did not thread it through the hole, I put the filter in the tank and pushed the hose up to the bottom of the tank. Sometimes I have a brain fart!!!!! Thanks again, Ode
-
Hello all, I have an older Strikemaster mag 3 and it leaks gas around the hose below the tank. I bought a new tank thinking that was the problem, but I believe it has something to do with the filter and where the hose hooks up. Any help with this would be appreciated. Thanks, Ode
-
wormfood, I have the Mag III with the 49cc engine and have used it for years.I have a manual and should be able to help you out with gas mixture and spark plug info. The gas is mixed at 24:1, 5 oz. oil to 1 gallon of gas. If the plug is fouled it can be replaced with a Champion CJ6Y or equal. I hope this helps you get it going. Ode
-
Hey guys, Do you know if the ice grippers will work with a bigger foundation??? Like size 13???
-
E-man, Try this.http://www.mwd.com/burnett/pike2.html
-
Mille Lacs Guy, Last night I posted the HSOforum for the place in Montevideo. Maybe I can't do that as it is not there today. If you want to e-mail me I will give it to you. oiverson1@charter.net