Jump to content
  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
FrontenacPike

Chokes and flight control wads

Recommended Posts

Hello everyone I'm looking to get an aftermarket choke for my Benelli. A while back I thought I read an article about with today heavyweight ammo and the flight control wads that you should buy a choke that is non ported. Supposedly the ports restrict the flight control wad and it leaves you with a poor pattern. Is there any truth to that? I know that the only way to get "the perfect" pattern is to buy a choke and buy several different brands of ammo, I'm just curious about the port issue and the ever so popular denser than lead ammo that is on the market today.

Share this post


Link to post
Share on other sites

The is the general line FrontenacPike. More open choke is often beneficial as well. The 20 gauge wads are not as picky though.

My 12 gauge stoeger 2000 shot the Federal #5 Flite control lead shot through a ported Comp n choke choke very well. This choke is tight and has a wad stripping design and it still like them FC shells better than anyuthing else I pushed through it.

So I guess you never know for sure until you try.

Share this post


Link to post
Share on other sites

I tried the Federals last year with the flight control wad with poor results. I thought they patterned ok, but what patterning your gun doesn't tell you is how much knock down energy you have at different ranges. As it turned out last year, 30 yards was too far.

I usually stick with a higher velocity round, but thought I would give the Feds a try.

Share this post


Link to post
Share on other sites

i like the federal premium 3" t shot shells can put a real smack on them!!

If your using "T" shot for turkeys, you're looking for a ticket. The largest maximum shot allowable for turkeys is #4.

Share this post


Link to post
Share on other sites

As it turned out last year, 30 yards was too far.

Either you have a goofy pattern or you missed. At 30 yards, 6 shot lead has more than enough momentum to penetrate and kill.

Share this post


Link to post
Share on other sites

I dropped a turkey 3 years ago with #5 lead Federal FC at 43 yards and he when down like I hit him with a sledge hammer. Lots of holes through his head and neck.

Share this post


Link to post
Share on other sites

Originally Posted By: LEP7MM
As it turned out last year, 30 yards was too far.

Either you have a goofy pattern or you missed. At 30 yards, 6 shot lead has more than enough momentum to penetrate and kill.

My first shot kart-wheeled the turkey over backwards. He did the usual wing beat on the ground. After I left my stand and stepped out into the field, he stood up and ran. 2nd shot missed, 3rd kart-wheeled him again.

It was pouring rain that day and the birds were soaked. Not to mention I could see the pattern hit the wet alfalfa behind the bird, so yes I had a good solid hit on him. Future rounds out of my gun will be no less than 1300fps.

Share this post


Link to post
Share on other sites

The more I think about it, I'll probably just get a ported. There is enough ammo on the market other than the hyped up Federal I can play around with. I just thought prior to buying a choke, if it payed to get a non ported in case the Federal's was as good as initial reports.

Share this post


Link to post
Share on other sites

LEP, I am confused at your complaint here. A wet turkey head has no more resistance than a dry turkey head and I am assuming that your third shot was the farthest of the three shots and it knocked him dead. correct? Therefore, I would say that either you can complain about consistancy and quality control, or you missed... At 30 yards, I don't think a body shot will penetrate enough to kill a bird but it would probably shake him pretty good which is probably what happened on the first shot. Regardless, shoot what you prefer. I will vouch for the shells. My Benelli M1 & factory full choke is putting 12-20 in the head and neck at 40 yards. And they have plenty of energy. I rolled one at 42 yards last year.

Share this post


Link to post
Share on other sites

turkeys are like geese right? so the shells should do the same thing to a turkey...

A goose needs to be knocked out of the air. You have to break bones and penetrate to the vital organs to kill it.

A turkey "SHOULD" be hit in the head/neck with a good tight pattern. Smaller pellets will hold a tighter pattern and will easily penetrate the thin skin of the neck and wimpy skull of a turkey for a quick, clean kill. This is why the law says "no pellets larger than #4" I have no doubt that your "T" shot will kill a tirkey. That's not the point. The point is, it is illegal to use for turkeys.

Share this post


Link to post
Share on other sites

dhuth,

my point was these rounds did not work for me. It doesn't mean they wouldn't work for someone else. I am 100% confident I hit the head/neck area of the turkey.

I also didn't mean that a wet turkey would have any more resistance to a shot than a dry bird unless of course someone tried a body shot and the feathers might be more dense. This is not the case here. I would never take a body shot or any low percentage shot for that matter.

Share this post


Link to post
Share on other sites

Originally Posted By: broken_line
turkeys are like geese right? so the shells should do the same thing to a turkey...

A goose needs to be knocked out of the air. You have to break bones and penetrate to the vital organs to kill it.

A turkey "SHOULD" be hit in the head/neck with a good tight pattern. Smaller pellets will hold a tighter pattern and will easily penetrate the thin skin of the neck and wimpy skull of a turkey for a quick, clean kill. This is why the law says "no pellets larger than #4" I have no doubt that your "T" shot will kill a tirkey. That's not the point. The point is, it is illegal to use for turkeys.

I would also add the hunter safety factor when choosing smaller shot sizes.

Share this post


Link to post
Share on other sites

I shot ducksd with blackcloud and I belive that they have the flight control wads and my gun is ported and had great results so with that said what do you guys think about blackcloud for gobblers? in 4 shot of course

Share this post


Link to post
Share on other sites

you know i was wondering about blackcloud for turkeys, it sure does work well for ducks. It's steel though and I don't know that shooting it thru a turkey choke would be very good for your gun

Share this post


Link to post
Share on other sites

well I thought of that also but I have a full choke for steel that does work very well and I know they make extra full for my gun for flying fowl. I guess I'll have to make a decision soon.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Your Responses - Share & Have Fun :)

    • WOW!  More wow to come.  😎
    • Great looking plots and Set-ups! My early season clover plots are doing very well! This weekend I will work on the fall brassica plots, have 3 small ones, about 1/2 acre each to put in. Can't get to them with a tractor so will be doing the tilling with a walk behind garden tiller. Going to be a ton of work but this rain will be great to soften up the ground. I will also be sliding a few portables around and I need to finish to more enclosed permanent stands. I usually do all this stand work in April/May but this past spring I just did not get to it...
    • Nice! I will put a few out this weekend.....
    • Next up was installing the floor. We went with 3/4” marine grade plywood. I also coated both sides and all edges with a water sealer just to be sure.    After installing the plywood floor we put the furring strips in and ran the wiring.    Each wire goes back the front wall where I made a little panel. The front wall has an opening for a 55” TV that sits flush in the wall. The little squares above and below the tv opening are for in wall speakers.  This is half of the wires the other side of the panel has the other half.  This is all the positive wires coming through the front wall and behind the panel. I forgot to take a picture of the back of the panel after I cleaned it up and put the negative wires through.  Here is a picture of the front of the panel while I was booking everything up. All the positive wires on the left and negative on the right. My wiring is a lot different than most shacks. I’ve never made a panel like this before so I didn’t really know what to order. The terminals that the wires go into are called din rail terminal blocks the snap onto a little piece of aluminum called a din rail.  Later I found stackable ones that would have saved space but I like how it turned out. Each terminal block has a slot in it where you can put a jumper. So everything that was going to be on one switch would be jumpered together. Things on a different switch would be jumpered and so on. The terminal blocks have a hole on the top where one wire comes in and gets screwed down to hold it and there is the same on the bottom. So once the terminal blocks are jumpered to things you want on the same switch you only need one wire out the bottom. Things that were ran off of the switch went out the bottom and over to the relay board. You do the same for each thing you want to run off a different switch just run a wire to a different relay. The long green rectangle thing on the right is a relay board. Our house has 12 light switches not all of them are used yet but they can be so I bought a relay board with 12 spdt relays. The green square on the left is an arduino which is basically like a mini computer chip that you can program. I’ll explain more once I get to what our switches look like. The bottom right of the panel is for the trailer lights and brakes and all the stuff that hooks up to the truck.  I eventually replaced these normal terminal blocks with the din rail style.  Here is the wiring panel all finished up.  The reason for using all the relays and arduino was so I could use this light switch and eventually be able to control everything from a smart phone. In the fish house we have 2 of these switches which each have 6 buttons on them. Each switch has a set of cat 5 cable running to it. One set is connected to the atduino board and sends a signal saying the button was pressed.  The other cat 5 wire is to send a signal to turn on and off a little light next to the button when it is pressed   Here is the back of the switch. So basically how it works is the arduino has pins on it that can send or receive signals it also has pins that can send 5 vdc or 3vdc. So one wire from the arduinos 5 v pin hooks up to the back of the switch where it says sc (switch common 5v coming in). A different wire connects a different arduino 5 v pin to the terminal that says pc (pilot common which is just the little lights next to the buttons). So when a button is pressed a brief 5 v signal is sent from the arduino to the switch which goes through board on the switch and to the wire terminal that is for that button the signal is then sent back to a digital pin (receiving pin) of the arduino on a digital pin. The arduino has to be programmed to receive different signals on the pins you want. Once the arduino sees that a button was pressed it sends a signal over to the relay board saying a button was pressed close the relay that corresponds to that button. When the relay closes it allows the 12v to go to whatever you want to turn on. The nice thing about how this system works is everything can be changed in a matter of minutes. Say I wanted to have the ceiling lights be on button 4 instead of 1 you just have to change a couple of numbers in the code and plug the arduino into your computer and upload the updated code. I’m sure I lost most people right away and I’m not sure if anyone else would even want to do something similar but If so you can message me and I can try and explain it better. Before this I’ve never done anything like this so I had to learn all of this online and how to write little bits of code and do all that which was fun but also frustrating at times since I didn’t have anyone to go to with my questions.  Not sure If this video will work or not.  4B8EE058-806B-4BF6-8DD8-8FC76BE46BD0.MOV  
    • Everything is going strong now. Been making salsa for the last week or so, have been doing abt's with the jalapenos,  thinking on letting them go red to spread it out a bit. The early girls are kicking em out but the big boys have a bit. Canned two jars of pickles with more coming down the pipe, but I'm gonna hafta start grilling some zucchini,  can only make so much bread.    Bell peppers seem to be running a little on the small side, starting to change colors but was hoping for some better sized ones for stuffing. Snap peas did good out of the gate but are trailing off already,  ya gotta love this time of year!!
    • juicy or freeze dried?
    • Most of the state has been experiencing sunny, warm, and beautiful summer days. The forecast predicts some rain over the next day or two, but otherwise it looks like warm temperatures and clear days and nights. Canoers at Mays Ledges at the Brule River State Forest.These mild and sunny days have been great for canoeing and kayaking and many river water levels are moderate and perfect for paddling. The lower Wisconsin Rivers is running just about normal for this time of year, with many sandbars popping up.Much of the state has been hovering at moderate fire danger this week, which means, in the right place, wildfires can happen. Nearly 60 wildfires have occurred across the state in July, mostly caused by fireworks or sparks from equipment. .
    • Looks to me like a great fishing cart...mount some pole holders on the sides and a cup holder for your beverage and life is good!!🎣
    • i still have some from 2016, most from last year yet but i like to stay ahead. how do they say it........i like to let them MELD!!!!!!!!!😁 that was a 1/2 bushel, smaller batches makes it not so over whelming. especially on a work nite. 
×