Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. 😀

  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
TonkaBass

centirfugal mold

Recommended Posts

Has anyone made there own. Just looking for an end of winter project and to make some custom jigs for personal use.

Share this post


Link to post
Share on other sites

Why? Just be sure your mold is preheated and you use alloy free lead (no tire weights). You should not need the centrifugal force to pour perfect castings.

Share this post


Link to post
Share on other sites

because tire weights are alloyed lead, it freezes at a higher temprature. I want to use a centrifugal mold so I can make a wax model of a jig and them replace it with lead. I knew a guy who made one and used it to make jewlery. The amount of detail you get get is awesome. Also it would be a lot better than a machined mold and cheaper. I could play around with with the different designs I come up with until I find one I like, then I could get a mold made for that one.

Share this post


Link to post
Share on other sites

So you want to try investment casting!

Check out jewlery supply resources and you should be able to find a setup. I think they work on a spring principle where you pour the metal and let it spin!

Share this post


Link to post
Share on other sites

Thats a pretty big operation to set up. I used to have one. My suggetion would be to wax your patterns and go to a dental lab and ask them to cast them for you. They will not use lead but a non precious alloy. If you want to do it yourself you will need the centrifuge, investement rings and bases. Investment,tongs and a torch. These can be found in jewelry and dental lab cataloges. You will see they are pricey. Another way to go is with silicone molds. You can pour those directly with lead. This is much faster and you can get as much detail as you want depending on your mold making abilities.

Share this post


Link to post
Share on other sites

Why not try this: Since the initial pressure in the mold is a function of the specific gravity of the material times the sprue height, why not burn out the investment, fix a tall sprue pipe to the plaster and quickly pour the metal. You should get a hammer effect as the sprue fills up and pushes the molten metal into the mold cavity.

Share this post


Link to post
Share on other sites

so just use the weight of the lead to fill the cavity like on a normal mold, but make the sprue longer? I wonder if you would have to keep the sprue pipe hot the enitre time with a torch to keep the lead from freezing and clogging it. Sounds like a good idea though.

ddbyday- how do you make a silicone mold??? what kind of silicone do you use?

Share this post


Link to post
Share on other sites

Pure lead pours with as much detail as a centrifical lost wax investment casting. The investing and casting method is way too precise for a fishing lure cast with lead. As said before avoid the wheel weight lead. It is too hard and does not cast well. Investment(the material you encase your waxed jig) in is designed to compensate for the dimentional shrinkage or expansion of the object you are casting when it goes from a molten state to a solid. This ideally would produce an exact repica of your design. We are talking microns. I assure you this is not the way to go. U tube has some very good tutorials on mold making. The silicone is basically vulcanized rubber. Hilts molds is now taken over by another operation but you can get the silicone blanks which you vulcanize yourself. There is a really nice video on u Tube about centrifically casting vulcanized rubber molds for high production castings.

Share this post


Link to post
Share on other sites

Awesome info! Yeah like I'm sure you can tell, my eperience with these types of molds is limited. I have seen it done though, and remember it as being pretty simple, but I guess some things are easier said than done. Thanks for the information though, i appreciate it!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Your Responses - Share & Have Fun :)

    • UFFDA dats close!!!!!!!!!! we are close to the spring lake store iffin you go that way much!!!!!!
    • Not much to complain about so far, must be why its so quiet in here. From the games I am seeing we don't even look all that great yet but are finding ways to win and Dubs/parise/granlund have been amazing. Will need some depth to kick in to be any kind of real contender, and of course we need to find a way to actually score goals if we make the playoffs, it seems that is always the issue. 
    • Right there by Riley's.  Hopefully they stay locked up and the wind and temps behave.
    • well, it is a what have you done lately society, soooooooooo........... nope........my neck is fine!!!!!!!!!!! i may need to get it massaged by some of those new female hunter trainee's however!!!!!!!!😉  
    • For reference I do have the original Helix 5 and its just the basic unit so newer units may be better with interference.  
    • Well what year?  This season yes. 😉 Aren't you in the hospital getting the neck wound stitched! 😂
    • I have the Helix 5 Chirp GPS II.  I know you're looking for complaints, but I honestly don't have any. It probably does fight with a Vexilar, but the version I have has a bunch of settings you can adjust if you're getting interference. I'm not sure the original Helix 5 had that option or not.   But sorry, no complaints. So far I would buy one again. I bought mine at the Ice Show in St. Paul last winter, which saved me about $50.
    • Test hole on an Aitkin county area lake 20 feet from shore yesterday evening. The morning before got just a stomp test 10 feet from shore and not a single crack or tremor. Locked up all the way across, but there are some scary looking dark spots in the snow way out there. The end of hand auger season is in sight!    
    • nice deer!!!!!!!!!!!!!!!!!!!! bigger then leech's!!!!!!!!!!!😂
    • mnwildman gets 4th win with 330 pts. 2--Fishing_Novice            280 3--huckfin                          273 4--BlackLundProV            257 5--Juneau4                        227 6--icefishinnut                   192 _____________________________________________________ Season Total 1--Fishing_Novice             9769 2--Juneau4                         9531 3--BlackLundProV             9458 4--huckfin                            9372 5--icefishinnut                    9229 6--mnwildman                    9227 7--Rip_Some_Lip                8434 8--rl_sd                                 7942 9--Swiveldigger                   7101
×