Jump to content
  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
nmitchell17

Shappell s2000/ Trophy Jr. Fish houses

Recommended Posts

I was wondering if anyone has had any experience with the Shappell icehouses or trophy jr fish houses? What are they like to pull, how do they stand up in the wind, how are they for room, that kind of stuff. Thanks for any info.

Share this post


Link to post
Share on other sites

I had a Shappell DX3000 house, so hopefully this isn't too far off topic. I thought it was perfect for 2 people with a buddy heater right between us. I thought it was just as nice as the Clams. Bigger than the Clam 2000, but smaller than the 5600. I compared the DX3000 with the S series and the material is much better on the DX series IMHO. Like any suitcase, can be a pain to drag through snow. Make yourself runners for it. I think Shappell sells them too. The bucket holders for when you're dragging it is a nice little add on too. For the price, they are decent houses.

Share this post


Link to post
Share on other sites

The s2000 is quite small inside. one person w/ heater or two people w/o. Standing is not optional. Its light so you'll want to stay inside on windy days but it is sealed up well so it holds the heat in well.

It is light and pulls easily. The dark color and small size makes it quite warm inside on sunny days. I use mine as a warming hut for tip-uping mainly.

Share this post


Link to post
Share on other sites

I beg to differ!

My first portable was a Shappell plastic suitcase style from Fleet Farm. It had the style where fisherman sat opposite of them selves in the shack when setup. It had 1’x3’ slots on each side, that would hold two drilled holes in them just fine. They also advertised it could be used for spearing/dark house also.

I would have a chair set up on each side, facing each other. I would put the heater right on the hinge area and it worked great. The heater was a 20lb sun flower. You had to turn it away from the guy sitting next to it, but it worked out in the end. Hundreds of fishing trips in my old Shappell.

It was given to me by my wife back in 95’. This was back when she used to encouraged me to go ice fishing with my brother in-law grin.

A Shappell is a fine starting portable, but you will want more after a couple years.

Mine was purchased when flip over’s where unheard of by the regular guys, because of price and they just came out. I used it for about 5 years until I bought my first Canvas Crafts flips over, which I still own to this day.

You can get your self in to an economical “Wild Series” Otter brand flip over now for the same price as a Shappell and more many years of fun and productive fishing with your fishing buddies and heater wink. Plus get the quality that everyone says is the best wink .

!!!!Click here for a taste of the Wild!!!!!!!!!!!!

Share this post


Link to post
Share on other sites

The more I think about it, my first portable was a garage/home made, wood floor and wood ends, with canvas in the middle, heavy as all get out, four hole monstrosity from the late eighties/early nineties wink.

We still had fun though!

Share this post


Link to post
Share on other sites

I had a shappell 2000 also years back as did shackbash. Fished two people and a 20lb. sunflower heater for 3 years. Not much room for extra gear, but plenty for your two guys and electronics. kind of tight, but enough room. Put it this way. There is not any extra space but it is enough. the only reason I got rid of it is because the mice ate it! I then bought a flip over which by then were popular. comfy little shack. I guess I had no complaints with it at all.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Your Responses - Share & Have Fun :)

    • I hear you Paceman work just seem to all pile up. Finally seeing and end in sight. Good luck with the barassica, the new turned dirt in the pictures above by the Muddy blind will be brassica. Just did that last weekend.    
    • Mine were freeze dried.I would think the live ones would die and rot pretty fast wouldn't they?
    • Did anybody take the trip to Sparta last week?  Believe this was my 9th year attendidng, what a great, fun shoot.   There's another in Aurora, MN early September I'm thinking about going to.  Anyone who enjoys 3D archery, or just likes rubbing elbows with hundreds of other archers should definetly put this on their list of things to do.  
    • That looks GREAT! You did right on the wheel wells, diamond plate is horrible to keep up. Mine is getting either POR 15 or bedliner this fall.Keep going, ice comes pretty fast when your trying to finish a build. Plus it's a lot nicer working conditions than Late November. Very good pictures, these build are fun to watch. 
    • WOW!  More wow to come.  😎
    • Great looking plots and Set-ups! My early season clover plots are doing very well! This weekend I will work on the fall brassica plots, have 3 small ones, about 1/2 acre each to put in. Can't get to them with a tractor so will be doing the tilling with a walk behind garden tiller. Going to be a ton of work but this rain will be great to soften up the ground. I will also be sliding a few portables around and I need to finish to more enclosed permanent stands. I usually do all this stand work in April/May but this past spring I just did not get to it...
    • Nice! I will put a few out this weekend.....
    • Next up was installing the floor. We went with 3/4” marine grade plywood. I also coated both sides and all edges with a water sealer just to be sure.    After installing the plywood floor we put the furring strips in and ran the wiring.    Each wire goes back the front wall where I made a little panel. The front wall has an opening for a 55” TV that sits flush in the wall. The little squares above and below the tv opening are for in wall speakers.  This is half of the wires the other side of the panel has the other half.  This is all the positive wires coming through the front wall and behind the panel. I forgot to take a picture of the back of the panel after I cleaned it up and put the negative wires through.  Here is a picture of the front of the panel while I was booking everything up. All the positive wires on the left and negative on the right. My wiring is a lot different than most shacks. I’ve never made a panel like this before so I didn’t really know what to order. The terminals that the wires go into are called din rail terminal blocks the snap onto a little piece of aluminum called a din rail.  Later I found stackable ones that would have saved space but I like how it turned out. Each terminal block has a slot in it where you can put a jumper. So everything that was going to be on one switch would be jumpered together. Things on a different switch would be jumpered and so on. The terminal blocks have a hole on the top where one wire comes in and gets screwed down to hold it and there is the same on the bottom. So once the terminal blocks are jumpered to things you want on the same switch you only need one wire out the bottom. Things that were ran off of the switch went out the bottom and over to the relay board. You do the same for each thing you want to run off a different switch just run a wire to a different relay. The long green rectangle thing on the right is a relay board. Our house has 12 light switches not all of them are used yet but they can be so I bought a relay board with 12 spdt relays. The green square on the left is an arduino which is basically like a mini computer chip that you can program. I’ll explain more once I get to what our switches look like. The bottom right of the panel is for the trailer lights and brakes and all the stuff that hooks up to the truck.  I eventually replaced these normal terminal blocks with the din rail style.  Here is the wiring panel all finished up.  The reason for using all the relays and arduino was so I could use this light switch and eventually be able to control everything from a smart phone. In the fish house we have 2 of these switches which each have 6 buttons on them. Each switch has a set of cat 5 cable running to it. One set is connected to the atduino board and sends a signal saying the button was pressed.  The other cat 5 wire is to send a signal to turn on and off a little light next to the button when it is pressed   Here is the back of the switch. So basically how it works is the arduino has pins on it that can send or receive signals it also has pins that can send 5 vdc or 3vdc. So one wire from the arduinos 5 v pin hooks up to the back of the switch where it says sc (switch common 5v coming in). A different wire connects a different arduino 5 v pin to the terminal that says pc (pilot common which is just the little lights next to the buttons). So when a button is pressed a brief 5 v signal is sent from the arduino to the switch which goes through board on the switch and to the wire terminal that is for that button the signal is then sent back to a digital pin (receiving pin) of the arduino on a digital pin. The arduino has to be programmed to receive different signals on the pins you want. Once the arduino sees that a button was pressed it sends a signal over to the relay board saying a button was pressed close the relay that corresponds to that button. When the relay closes it allows the 12v to go to whatever you want to turn on. The nice thing about how this system works is everything can be changed in a matter of minutes. Say I wanted to have the ceiling lights be on button 4 instead of 1 you just have to change a couple of numbers in the code and plug the arduino into your computer and upload the updated code. I’m sure I lost most people right away and I’m not sure if anyone else would even want to do something similar but If so you can message me and I can try and explain it better. Before this I’ve never done anything like this so I had to learn all of this online and how to write little bits of code and do all that which was fun but also frustrating at times since I didn’t have anyone to go to with my questions.  Not sure If this video will work or not.  4B8EE058-806B-4BF6-8DD8-8FC76BE46BD0.MOV  
    • Everything is going strong now. Been making salsa for the last week or so, have been doing abt's with the jalapenos,  thinking on letting them go red to spread it out a bit. The early girls are kicking em out but the big boys have a bit. Canned two jars of pickles with more coming down the pipe, but I'm gonna hafta start grilling some zucchini,  can only make so much bread.    Bell peppers seem to be running a little on the small side, starting to change colors but was hoping for some better sized ones for stuffing. Snap peas did good out of the gate but are trailing off already,  ya gotta love this time of year!!
×