Jump to content
  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
MUSKY18

Mille Lacs Muskies

Recommended Posts

Has anyone been out on the big pond recently chasing? Other than Steve Jonesi, I don't know if anyone has been seeing/catching fish or not. For those of you who don't know, Steve guided a client of his to a huge 56.5" muskie last week. They still in the weeds? Has the north end started to heat up at all?

Share this post


Link to post
Share on other sites

Bret, my buddy went up there this weekend with a couple guide clients to go after a few. I should have a report in the next day or so. That 56.5 was an impressive fish, and hopefully by November it will be the new state record. She needs to bulk up, but it could happen. Couldn't really tell from the pic but was she a bar or spot fish? Do you know?

Share this post


Link to post
Share on other sites

Can't really tell from the photo I have seen. Know it was the Wisconsin strain, not the Leech strain.

Share this post


Link to post
Share on other sites

Does anyone know where I could see a picture of this beast? I lost a monster last summer on the north end when it would not fit in my BIL's net so I was wondering how it would compare....

Share this post


Link to post
Share on other sites

the only picture that I know of right now is on Muskies First. Look under the Steve Jonesi Rocks thread and they have a pic of the fish, guide and client.

Share this post


Link to post
Share on other sites

56.5x25 - WI strain - barred -

fish still in weeds - nothing on the north end - rocks are slow. fishing are moving if your in the right areas.

Share this post


Link to post
Share on other sites

We've been catching fish out there on a pretty regular basis. A few lost ones as well. All of our fish are coming from the weeds. Seems to be very little going on yet on the rocks, or on the north end. Nothing huge yet...but just a matter of time!

Share this post


Link to post
Share on other sites

Tim,

What is the water temp on Mille Lacs?

You been getting any ski's in Waukon Bay or Vineland?

Thanks

Brian K

Share this post


Link to post
Share on other sites

fish were a noshow in vineland today water temp 72 there were 5 boats or so and we never saw a fish or anyone else doing anything, threw the box at them, maybe next time

Share this post


Link to post
Share on other sites

Vineland was great earlier in the season, it's been a total bust for me lately.

Share this post


Link to post
Share on other sites

Dang thats HUGE... imagine how big she'll be in the fall... I'm betting she'll be 56x30 in the fall...

Share this post


Link to post
Share on other sites

Rebel..............I will let you know just how much bigger she is this fall when she eats my Pink Double Cowgirl!!!! smile

Share this post


Link to post
Share on other sites

Hmmm Bret... that sounds good... but... remember this... I have an Oct 14 trip with Jonesi... and its FULL moon... I feel the Muskie gods are smiling down at me on this one grin

Share this post


Link to post
Share on other sites

Muskyman, looks like east side, just south of a large point, with a great sunset in the bay smile

Share this post


Link to post
Share on other sites

Rebel......congrats on your trip with Jonesi in Oct. Bad news is that you are going to be about 28 days shy of me catching her!! Got Jonesi out on the pond for the 16th of Sept, during the full moon, so we will have to see how she goes!

Plus as an added bonus, I get to spend an entire day in the boat with Steve during Operation Muskie, so you bet your behind that I will be picking his brain like none other. By the time he gets me off the water, he might not want to fish with anymore cause I won't stop asking questions!!!!

Share this post


Link to post
Share on other sites

Thanks Bret... You're more than welcome to catch her... but bad news for you, she'll have 28 extra days to BULK up some more, and we both know she'll BULK up in between, thanks to the depression/embarrassment of falling for your lure, you know how women can be whistlewink... Keep in mind she'll add 2-4 inches to her overall girth come the time I catch her on full moon on Oct 14th... and I'll be happy with that grin

As for picking Steve's brains apart... I think he lives for that... otherwise he wouldnt be the guide so MANY wants to fish with...

Bring back some excellent stories/pictures from the Operation Muskie excursion... Many including myself are eagerly awaiting for those...

Share this post


Link to post
Share on other sites

Quote:
Muskyman, looks like east side, just south of a large point, with a great sunset in the bay

Very funny!!! How would ya get a sunset on the east side though?? wink Gotcha!

I'll be out for a day with Steve in 2 weeks. I'm taking my 17 year old nephew, it's a Golden Bday present for him, as he's my godson. He's got a couple high 30s fish, but hasn't cracked 40 inches yet.

Sure I know the lake well enough to do it on my own, but what a great memory for him, and cool for me to let him have the front deck to himself and have Steve give him the one-on-one guide service. Plus, Steve is flat-out a hoot to listen to for a day! I'm on vacation the week after too, so prefect timing for me to get a gauge on what's working for the week after.

Yeeeeeeaaaah man, he's boated a few big fish the last couple years too!

Share this post


Link to post
Share on other sites

Mille Lacs was "good" the last few days. I was up Tuesday night, Wednesday, Thursday and this morning. Saw quite a few fish, couple biters but none in the boat. I screwed up royally twice on boatside hits. Plenty of follows, but not many that were right on the bait.

Fished with Jonesi Wednesday night, Steve's awesome. Saw that 56" fish swimming yesterday morning several times, it's just stupid how big she is. Saw some other one's too that are just in a whole different size class from anything i've seen in the cities. That lake is just nuts. Too bad they're all so friggin tight lipped.

Caught a bunch of walleyes and smallies too, great couple of days on the water. Yesterday was the best, the lake was pretty much flat from 10am onward. Took my little boat all the way across and back without issue. Don't expect to do that again anytime soon.

Share this post


Link to post
Share on other sites

Jeff, what rig do you run, and were you fishing alone? We were up there Wed all day as well, nice not having so many boats out. Saw Luke R's client boat a 53" right in front of us that evening. Reel blw up on the fight, but landed okay. Also saw a pig on Myr Mar rock reef, just laying there givin' us the fin. Caught a few smallies middle of the day, biggest 21". Had one follow and saw two others.

Share this post


Link to post
Share on other sites

Cool, even without boating one, sounds like a good trip. Those smallies are a blast!!!

Well stated: "That lake is just nuts." Good part now is an upper 40 inch follow doesn't make ya nervous anymore! One day on Mille cured me of that syndrome!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Your Responses - Share & Have Fun :)

    • We are still going to put a piece along the bottom but I’m not a fan of diamond plate so we are going to try some annondized aluminum.    We were going to get some decals for the side but I was starting to like the plain look so we just went with some small things for now.  I think that about wraps up the outside and I think I have to quit for the night people weren’t kidding when they say writing these up takes awhile. I’ll post the inside stuff tomorrow. 
    • Next up was prepping the studs for the VHB tape. I scratched up each stud with a fine wire wheel attached to a drill then wiped clean with isopropyl. We went with 1/2” VHB tape since we got it for next to nothing. Around the windows and some other areas we did two strips of tape to cover the whole stud but most of the studs that were just getting sheeting we did one strip. I would recommend the 1” though it would be a lot faster.  people are not kidding when they say there are no second chance. The corner piece that is sitting inside had to be kicked off and we never even pressed on it. Good thing we had one extra sheet but no more mistakes could happen after that. The place we were working at had a bender we could use to get our corner bends which worked out great.  The windows are from menards. I custom ordered them which turned out to be cheaper than buying the stock jeldwen ones which didn’t come in the sizes we wanted. The first shipment of windows came in and when I went to pick them up two of the 4 had cracked glass and the guy working goes “so you don’t want these?” I was like no I don’t want a broken window. So we had to go and re order new ones. Two weeks go by and I realized I never got an email confirming my order so I went back in to check on the status of my order and the guy said they never got reordered. At this point I almost lost hope in all of humanity but tried to stay calm. Finally got all the windows installed and the siding put on.  We wanted to try and do rounded wheel well so the picture above is prior to trimming the edges.  We tried using the 1/4” HDPE plastic sheets which looked pretty good. The next day when the sun hit that wheel well it expanded out about 3”. I wanted to screw it down and see if that helped control where it expanded but my brother wanted to scrap that idea. We ended up just using some steel sheeting and welded it up. All the corners and seems where water could get in was welded and then the whole wheel well was welded to the wall studs and a little bit of the frame.    Since the wheel well sees a lot of snow and salt we wanted it to be durable. The Berliner stuff you can buy usually doesn’t hold up so we brought it to a guy and had it sprayed. He said it should last forever and if we ever have any issues just bring it in and they will fix if.  I think they turned out pretty good and I think the rounded look is just something different than the traditional square wheel well.    Our door came from FishnStyle in shakopee, they sell firebrand so this is the same door they use. It’s made by a company called challenger doors.   We cut a piece of aluminum sheeting so it would fit perfectly over the white color it came with. We used the thin VHB seam tape to attach the aluminum sheet to the white aluminum skin of the door. Only other thing we had to do was cut our a small hole so the door handle could go through. The whole door is held on by VHB tape and I also threw in a couple of stainless self tappers since the door came with pre-drilled holes.    For the roof we did a one piece aluminum roof held on by VHB tape. I guess I didn’t take a picture of that but we got it from a local semi trailer repair company in Blaine for a couple hundred bucks  The roof trim is 3”x1/4” aluminum flat stock and the trailer lights are mounted to that. 
    • If the price was right and your happy!👍✌️
    • Next up was cutting all the 2”x1” tubing. My brother picked up this little bandsaw off hsolist that worked pretty well. Using sketch up was great, everything could be laid out and you knew exactly what length to cut everything.    Once everything was cut we started welding it up. Built each wall on saw horses and once we got to the last wall we finally had a system down, go figure.    once we got all the walls made we leveled out the frame. Had to add a bunch of weight to the back to try and get it flat. This is where I wish we had a flat driveway. After we got everything good and level we started welding the walls to the frame and to each other.    The next day was the roof. From looking at other builds I thought people were just running one piece of tubing across and just attaching to the two sides but as we found out that does not work. We tried that and the top of each side wall had way to much of a wavy look. Closer look at other builds looks like people made the roof the same as the walls on some saw horses so everything was square and then set it in between all the outer walls. We ended up doing something similar but we turned the inside roof length piece on its side so it was more of a strong back which minimized any waviness of the tubing. 
    • We were "missing" a few pieces of chicken between the time we took them out of the smoker and put them on the grill with the BBQ sauce. They vanished, I swear!
    • Figured I would post me and my brothers build on here since this is where I got most of the information from. Thanks to lipripper for posting his builds and answering questions. I pretty much based the house off of his with a couple of my own tweaks. Im not sure how pictures are posted on this it’s looking like they will all be at the end of my post so maybe I’ll start with one post then keep adding to it so the pictures stay in some order ( I was bad at taking pictures so I probably missed some stuff) So here we go...   The frame is a Berkon 21’ with a 4’ V galvanized. We called berkon and the guy said they had one frame left and it was $700 cheaper than normal price since they were changing something for ice castle so we put money down to hold it then he called and said ice castle needed it but they were going to make us a new one (this was the start of our struggles). Which actually worked out nice since we could move some bracing around and move the hydraulic pump to a different spot. We had them move the back center brace so we could have 3 holes between our couches similar to papabear. We  thought about doing aluminum but the guy at berkon said the weight savings would only be about 700 lbs and I personally don’t like how aluminum seems to get brittle in the cold.  Prior to getting the frame I tried to order as much stuff as I could think of like others have said to do but since this was our first fish house I wasn’t 100% sure on everything. I used google sketch to layout the studs and the windows. Hoping everything would work out as planned. 
    • Spring only for me, when Orioles first return. Mine never get hit much. 
    • Not sure if somebody put a lot of time in to make this or if it was something Arctic Cat made. I could see someone pulling this around Hay Days.Thought it was just to cool to pass up. 
    • Whatever trades they might make won’t be to make a run. It’s going to be to rebuild. I guess there’s still some interest in Dozier from a couple teams, but otherwise, we don’t have much trade value in anyone. I’m just still hoping we finish .500.
×