• RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
herm

Why the heck is the bilge pumping?

Recommended Posts

Here's one for which I need advice: Discovered this past week that when I back-troll, water is coming in somewhere/somehow. (I have a 2001 Skeeter 1775 tiller.) It's not a ton of water, but it is enough for the bilge to pump out after 30-45 minutes. My biggest question is how the heck do I determine where the water is coming in from? (I did pop off the access cover immediately below the motor, but doing so also let in enough water that I could not really find a source.) Any advice on trying to determine and ultimately seal/stop the water from coming in? Thanks for any advice.

Share this post


Link to post
Share on other sites

I had a similar problem with a Pro-V I had , did a lot of standing on my head trying to figure it out and it turned out that the boat I bought [new] had sat out all winter at the dealer and water was in the intake for the livewell and froze and a little crack was in the pump housing . I replaced the pump and problem solved . On another boat I had , same problem , different solution , when they put the intake thru the transom , the nut was tightened too much and broke the plastic pipe that was attached to the pump , never could figure out the problem cause it was not visible . One day it just broke and fell into the boat and water really poured in then I could see the problem ,replaced the unit and no more leaks .Might want to look at these areas , Good Luck in your search .

Bud

Share this post


Link to post
Share on other sites

I agree with hoses and pumps. If cracked they will leak when moving forward but water will be "sucked" back out by the siphon effect of the direction. When you backtroll water enter hull with much more pressure and will keep entering due to the pressure applied from moving backward.

As an example, if you forget the bilge plug (boat plug) you can drain it just by moving forward for a while, it will suck all the water out (guess how I found out... grin )

Share this post


Link to post
Share on other sites

The advice here sounds good. But perhaps the following are stupid questions (but they won't be my first, nor last)...When you say check the livewell hoses and connections, how do I do that? Do you mean just look at them with the naked eye with boat on trailer in garage? I will try, but have two concerns: 1. They are located in a place where my head won't fit (insert joke here.) 2. I don't have bionic eyes so I doubt I can see a crack/loose connection. Or should I do this with the boat in the water and backtrolling? One thought: What if I set my fish camera in that area and back-trolled? Might that reveal the leak?

Share this post


Link to post
Share on other sites

Some times you are able to seal off the inlets from the outside to see if water is still pooling in the bottom. You can add colored water to inlets/outlets to see if it appears in the pooling. The valve housings, pumps and hoses are usually (not always) from freezing over the winter.

Share this post


Link to post
Share on other sites

Herm, there is no "trick of the trade" here, you are welcome to use any possible mean to check for leaks. It will be much easier to detect if there is water in the lines or pumps. Maybe a visit to your local small lake will help.

Any way you possible you can use to look underneath the floor is sure welcome, if you have a camera available that's great.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Your Responses - Share & Have Fun :)

    • I figure any fish that doesn't get into my boat was a wall-hanger for sure. 😀
    • I've never bought a car/truck over $15K, so yeah.  It would take a powerball jackpot before I was in the market for a dealer showroom boat.
    • Dry brine with Mortons Tenderquick, amount directions per pound are on the package in a ziplock in the fridge. Add seasonings like onion, garlic, black pepper, maple sugar or brown, allspice, cinnamon, nutmeg. What ever you prefer. Take meat out of brine and let sit in Fridge overnight. Smoke around the 130 degree mark for 12 hours (for my liking) or as smokey as you like. Cut into 1/8" slices and cook in the oven 425 degrees for 20 to 30 min to your desired crispness. 
    • I just bought two panels that I am going to trim slightly to replace one of the 3 grates on my Big Horn grill... I actually have a buddy that received them this weekend for fathers day and say they work just as advertised on his pellet grill.... I will give an update next week when they arrive.
    • never heard of it....  
    • Since we are talking about searing stations, etc....   Has anyone ever used the Grill Grate product on their pellet grills?   https://www.grillgrate.com/shop-grillgrates/standard-grillgrates/pellet-grills/
    • You've got the right idea. There are a ton of bacon recipes here on HSO if you search for bacon - I've pasted one here to what seemed like one of the more popular brines. I made bacon once, and it turned out OK, but it's a long process.  Good luck and let us know how it turn out.  
    • Reverse seared a big thick 3lb cowboy ribeye for Father’s Day over charcoal. The novelty of the idea was fun. Then after cooking you realize you pay a lot of money for bone and fat and not a lot of meat.   Lesson learned to just go with a nice thick regular ribeye steak instead next time.  
    • Well this weekend certainly wasn't ideal for fishing weather. Between strong winds and storms every day Friday-Sunday it made it hard to get some good quality fishing time in. Just kept getting chased off the water with thunder and lightning in the area every day and night. Never saw a lot rain but plenty of storms in the area to keep us off the water.   Did manage to catch some fish regardless just nothing big enough or worth keeping. Not a keeper walleye caught and lots of skinny 8-9" perch which were all released.