Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. 😀

  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
ChuckN

Cold front moving in - now what?

Recommended Posts

Fishing activity finally picked up for me yesterday. The walleyes were going nuts, and I suspect from the systems moving in. The bite was really tough for the last couple weeks (around Otter Tail County lakes), and I still can't figure out why. One of the prizes from last evening was a 28" pig walleye CPR'd. Hope those pics turn out, had to do it solo.

Get out and fish!! I will be shortly.... grin.gif

Share this post


Link to post
Share on other sites

The last 2 weeks have been slow at best (chasing 'eyes) for me on a couple of the larger NE metro lakes (WB and BE). MAGIC EIGHT BALL - Do you forsee continued slow action or will this trigger a feeding frenzy before we go into the deep freeze next week? Or are weather changes going forward overrated?
I've kept my fishing interest up with my share of northerns to pass the time but I was spoiled 2 weeks ago with a nice run of 'eyes!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Your Responses - Share & Have Fun :)

    • If you can zoom in it's leaning up against my spear house, the red thing.
    • Only if Leech promises to keep his shirt on!
    • i've built/made about 8 of them.  took a piece of mild steel flat bar formed the chisled head by grinding the angle. had it hardened then took 1 1/2 or 2 inch pipe. cut out a slot for the flat bar fit it, welded it up. then took a plumbing end cap, steel, welded that to the pipe, then took a big washer, ground it to fit the end cap, welded it to end cap, then tied a rope to it.
    • Go to Leech's house, put on your apron and have an "artisan" bread baking party then. 😁
    • This white stuff is not bread!  😁
    • mine is about the same and it works!!!
    • Real decision is how much space is needed. Frabill is 6'6"x 6'6", Shappell is 7'6"x 7'6", Eskimo 949i ($289 Amazon & L&M free ship) is 8' x 8'. Find a spot in your home to tape off each hub size than cut 6ea paper circles to hole size and place on floor 3 people fishing. Mark door area on tape put all the gear the 3 people will use fishing, chairs, heater, rod case, coolers, minnow bucket tackle boxes coats  etc and place inside marked floor. You will soon answer the question of which one to buy. 
    • Depending how big you make it, I think the t handle will be awkward, prone to catching on stuff like your jacket, and it's unlikely to be held in a way that makes it useful.     I would put a hole or something for a wrist strap.  And if I was trying to be fancy I would give the upper part a coat of some gritty plasti-dip or a good wrap of hockey tape.
    • I agree Dave. But I hunt and fish and if I looked at it as a cost factor to gain!  Every dang one on this forum site knows the answer to that question! 😉   I just like to try stuff. One time I tapped the Maple trees in my back yard after spending a few bucks on taps and such. I made a block of maple sugar because I didn't know what the H I was doing, but it was Fun anyway!  🙂   Another time I made dried Sage smoke smudges like the Indians make, because some hippy dude at a old time Trapper rendezvous told me they help keep the misquotes away with out using spray. When our friends at the campground came over for a fire they asked if we were smoking Pot over here? 😅 This an't half of it but it's fun to try things. Makes life more interesting. 
×