My son (4) put a pretty nice scratch in my new truck about a month ago and then yesterday I saw one of those infomercialls for a the scratch remover. It looks great on TV but who knows if it really works?
What have you bought from TV, was it worth it, what have you always wanted to try?
I did buy some Miracle blades a few years ago and while the quality of the handles isn't the best, I do have to say that they are still as sharp as the day they arrived. We do have to hand wash them to not get pitting in the "stainless" steel. I feel for a 40 dollar set they have held up great.
I went ahead and watched some of the MLF coverage. Wheeler didn’t make the cut but the bigger story was the Poche/Avera fallout.
Kinda funny listening to both sides of the story and putting together the scenario, reading between the lines.
got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....
Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.
Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.
Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
Question
setterguy
My son (4) put a pretty nice scratch in my new truck about a month ago and then yesterday I saw one of those infomercialls for a the scratch remover. It looks great on TV but who knows if it really works?
What have you bought from TV, was it worth it, what have you always wanted to try?
I did buy some Miracle blades a few years ago and while the quality of the handles isn't the best, I do have to say that they are still as sharp as the day they arrived. We do have to hand wash them to not get pitting in the "stainless" steel. I feel for a 40 dollar set they have held up great.
That mighty putty looks awful tempting.
Link to comment
Share on other sites
23 answers to this question
Recommended Posts