Spice1 Posted February 15, 2007 Share Posted February 15, 2007 Im looking for the Inside dimension of the collar on the Strikemaster Lazer Adjustable Handle Hand Augers. I have an old Electra auger and I want to get a new lower unit for it. I have tested chippers and shavers and the shavers work much faster on it. Basically my question is can a lower drill unit of a strikemaster adjustable hand auger fit onto the drive shaft of power augers. Link to comment Share on other sites More sharing options...
PierBridge Posted February 15, 2007 Share Posted February 15, 2007 Not much help but I wouldn't think so....I believe the shaft on the power auger would be to big so without modification I don't think it would work. Link to comment Share on other sites More sharing options...
Ralph Wiggum Posted February 15, 2007 Share Posted February 15, 2007 I just measured in it on my 6" Lazer and it is a hair under 3/4". Link to comment Share on other sites More sharing options...
Spice1 Posted February 16, 2007 Author Share Posted February 16, 2007 Thanks...much appreciated Link to comment Share on other sites More sharing options...
magicstix Posted February 17, 2007 Share Posted February 17, 2007 I had the machine shop make me an adapter for mine and the exact size is .710 . Link to comment Share on other sites More sharing options...
dave_f Posted February 18, 2007 Share Posted February 18, 2007 Can you provide any more info on what you did. I'm thinking about trying to make something to adapt a hand lazer to an gas eskimo. It looks like both rotate clockwise to cut and i can't see why something couldn't be made to work. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts