Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. 😀

  • RECEIVE THE GIFTS MEMBERS SHARE WITH YOU HERE...THEN...CREATE SOMETHING TO ENCHANT OTHERS THAT YOU WANT TO SHARE

    You know what we all love...

    When you enchant people, you fill them with delight and yourself in return. Have Fun!!!

Sign in to follow this  
HateHumminbird

DNR Wild Turkey Clinics

Recommended Posts

For those first-time hunters, or even folks with a few birds under their belt, these clinics are a great way to glean a whole bunch of information about the wild turkey. Clinics are held throughout the state, so there's hopefully a convenient time and location for everyone. I attended my first one about 10 years or so ago, and found them to be very informative. It's also a chance to pull on the ear of some folks that have been at it awhile.

For a list of times and locations of clinics, visit DNR Turkey Clinics

In addition, I'll be instructor for one of these clinics in the Cannon Falls area. It will be on Saturday, March 31st, from 9AM-12PM. If the distance isn't too far, and it's a convenient time, I'd love to see you there! For specific information regarding my clinic, scroll down towards the bottom of the above page, and click on the link for the Cannon Falls clinic.

Joel

Share this post


Link to post
Share on other sites

I will also be conducting clinics this spring for those interested in learning a little more about turkey hunting.

My first course will be at the Caribou Gun Club in Le Sueur on March 3rd from 2-5 p.m.

The second course will be in Redwood Falls on March 17th. Check the link that jnelson (Thanks jnelson) provided for contact information.

Don't forget the numerous turkey banquets coming up this spring too. They're a great time.

Share this post


Link to post
Share on other sites

I went to one of these clinics my first time turkey hunting. Helped a lot. Very informative and i would suggest everyone go to one of these.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  



  • Your Responses - Share & Have Fun :)

    • Trailer, one side, brake and turns dont work, same wire, same bulb filament.  Sounds like a ground problem.  With other tow vehicles its ok.  Are these 7 pin to 4s?  Could be the wrong adapter?  Not all 7 to 4 pins are the same.  Sometimes too that bad ground seeks its path through the hitch.  
    • Wrapping up the ice fishing after tomorrow. I’ve never owned a propane auger before this one and the one I have was bought used. Any storage tips?  
    • They are probably wired differently. I’ve seen this happen.    Actually I had a brand new 2015 Silverado 2500 diesel issued to me as a company vehicle and had issues galore with the factory wiring and the gooseneck trailer I was pulling. It was the biggest nightmare I’ve ever had and it was all with the factory Chevy wiring and integrated brake controller.   
    • Not the best time of year to be laying in the cold and slop under a truck tracking down wires but I have done that as well. Sounds like you then need to track down the yellow wire on the truck and see where it may be corroded and shorted somewhere.  
    • Thanks for the response leech. I purchased an adapter similar to that one with the test lights. Both trailers I tried are almost new and both have LEDS. All work great with Moms SUV and Dads truck. I’m thinking it has to be somthing corroded or a broken wire on the truck end. But figuring that out is out of my reach.
    • Sounds like it may be a bad harness on the trailer it's self.  Get one of these and test the truck again. If all works it's time to fix or replace the trailer harness. I've done both on the 5 different snowmobile trailers I have had over the years. It could just be a bad corroded or shorted rear light fixture on that one side or a shorted wire on that side.   ATB 16687 Truck Trailer Vehicle Plug Tester 7 Round Blade 4 Pin Wire Light Brake RV Tow  
    • I know this forum gets very little people now days but maybe someone could help me out. So I purchased my self a new ( to me) 2000 Silverado 1500 back in August. Be mindful this is my first truck/vehicle. So I tow often ( boat, snowmobiles, atvs, kayak). But the guy I bought it from had said all trailer lighting works great. So I didn’t think much of it. Well a few weeks after I bought it I hooked up a trailer to try the lights.... well. All running lights work perfect, but, no drivers side signal or brake light, passenger side brake light and signal work great. I have tried 3 different trailers and have tried them on 2 other vehicles everything works great. So first thought is Check fuses right? So it was in at a Chevy dealer getting some work done so I had them cheak it out. Fuses all look good and they told me all trailer lights work perfect. So I thought well maybe my 7 pin to 4 flat adapter was bad. I bought a new one of those and tried again. I got one with the test lights on it and sure enough all lights worked great UNTIL I hooked up a trailer. When I did this it kicked out the drivers side brake light and signal on the trailer. At this point I’m feed up with this issue and I’m to worried about getting nailed so I only tow a little ways from home. Anyone have any thoughts on what this could be? I was thinking maybe a bad ground on truck? But how would you know? And also this truck has spent it entire life in Florida until last May so this is the first winter in MN. But it shouldn’t matter since I tried the lights back in the end of August. Thanks a lot!
    • So reviving a dead thread ..


      The "park switch" may be the cause of the parasitic draw on some of the console equipped models, 
      it's an inexpensive switch that sends a shutdown signal to the BCM. When it goes bad the dash lights do not shut off and it drains the battery. 
      Fords fix is to replace the whole shifter assembly at around $650.00, they do not sell just the switch. 
      Here is the replacement switch with an more detailed explanation of why it happens.

      Its under e bay listing 292931561061
    • I leave it behind on purpose at times..........
×