Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Minnow Storage


gunflint

Recommended Posts

Anyone have any good ideas for quick and easy minnow storage? I'm not looking for an all day project. Something like, 5 gallon buckets with holes drilled,etc. With lake temps in the 50s minnows should live a long time. I need to buy a gallon or 2 for fall and I can't get decent ones locally. Thanks

Link to comment
Share on other sites

You can take the el-cheapo fish tank and put it right in the lake. take the top offa it and put window screen over the top. Wrap a bungee around it and voila, redneck minnow storage. That's kind of a cool thing cuz they would be getting fresh water all the time and you wouldn't have to change it.

If ya think the little fellers are getting hungry you can drop a small chunk of stale bread in the tank so they can feast on that for a while.

Link to comment
Share on other sites

I keep all my minnows in a 140 gt cooler and I put 2 cheap air stones in it.I keep approx 10 dozen minnows in there at all times.

I also add a chemical to the water to help with chlorine and such.I buy that at Wally word. I also change my water about every three-four days.You will have problems if you dont.

I keep these minnows all winter and lose very few.This has worked well for me summer and winter.Its in my garage and that never gets to hot in the summer.

Link to comment
Share on other sites

With help from Biglakebass' idea... grin.gif

I went to the hardware store and bought a roll of 1/4" metal construction mesh and I cut it up into pieces and made a rectangular shaped bait box with a lid. It doesn't look the greatest, but it works fantastic. It stands about 36" tall, 24"x18" wide. Holds a lot of bait. It took me about an hour to make it.

I tried a 5 gallon bucket contraption once and the minnows died. Not enough oxygen flow, but maybe if you drill a gazilion holes it may work... grin.gif

I also have a AC bubbler in a cooler/bucket and that works good, but a pain to change the water daily. Disease and contamination seems to kill them off after a week or 2 if you don't clean the container.

Link to comment
Share on other sites

Mark the inside of the washer trick works great. A friend on Sturgion Lake would do this and keep minnows in it all year. He put a wooden lid on it with a handle and a bungy cord from the handle to a hole in the side of the tub. A couple big rocks on the bottom or some quickcreat should keep it in place reel nice. I would just toss it under the dock and make a trap door in the dock. It also worked good to keep fish over night that we were too lazy to clean late at night after fishing all day. Those Crappies and gills are a bugger to clean in the dark.

Or find a plastic 50 gallon drum and dril holes in it and place it in the lake off the end of the dock by your boat. I can get them from a guy down here for about $20. It would last forever.

Link to comment
Share on other sites

Yeah Steve it looks like this is going to turn into a project. But it's a good day for it up here. 25mph winds and rain. So it will give me something to do while the lake turns over.

I can't believe the price of Redtails. $90 for 20 to 25 dozen. What ever I come up with is going to have to include armed security. smirk.gif

Link to comment
Share on other sites

My wife doesn't like the idea much but I throw mine in our small coy pond in the backyard... the worst part is having to catch them when you want to head out. the best part is that they seem to really like it in there and they may even be reproducing. I threw about a dozen or so that were left over after fishing one day, they were all about the same size and when I went to get some out a month or so later, I pulled up some that were definitely smaller than the ones I threw in!

Link to comment
Share on other sites

I would just make a fine mesh box with 2x2 boards.... Frame it up and make sure the mesh is small enough to not allow anything in or out besides water. Should be easy enough to pull up and take out of the water. Hold the lid tight with a clamp and a lock and you won't have to worry about pesky critters hopefully!!!

Sounds like I have the same idea as ChuckN.....

Link to comment
Share on other sites

This has turned into a highly complex engineering masterpiece. Involving hardware cloth, green treated lumber and various hardware. I am gathering the motivation to head out to the shop now.

I'm trying to keep these things alive for the month of october.

Link to comment
Share on other sites

You can probably get 4 gallon or 5 gallon buckets with lids for free or no more than a dollar if you check with a bakery or grocery store deli. Just drill a bunch of holes in the bucket and lid, add a small rock, and you should be able to keep minnows in a lake.

Link to comment
Share on other sites

When I fish some of the remote lakes in Canada I use a couple of 5 gallon buckets with holes drilled in the bottoms and the sides. A rock in the bottom deep six's the bucket and they are otter proof. Each bucket holds about 10-12 doz and die off is minimal. If you have some flowing water all the better.

Link to comment
Share on other sites

I use the "guts" from an old 50 gal. aquarium that I used to have. The water recyler and bubblers are great. I put them into a cooler and keep them in my garage. Last year I had minnows into January until I finally used them all. I would have put them in the aquarium but it leaks pretty bad. This system seems to work fine for me, the only draw back is that if you don't have the top covered those redtails and river shinners like to jump out and commit suicide.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Bighorn sheep at Lemoille canyon.   
    • Wild horses in Sparks Nevada   ad
    • Donner lake near Donner pass in California   
    • Redwoods near Big Sur California.  
    • Power output is:  amps x volts = watts   If your charger is pushing 10amp at 12 volt: 12 x 10 = 120 watts.  2 banks = 240 watts.   240 watts / 120v at your outlet = 2 amp.   Efficiency isn't 100% so it's gonna be more than 2 amp on your garage circuit, but maybe like 2.4 amps.     I think.... It's been a while, LOL.  Either way 20amps output on a charger for a 12v battery isn't the same as pulling 20amps off your garage circuit.
    • Wanderer, thank you. I did look at the breakers for my garage/outside outlets and they are 20 amp.  I reached out to the company that makes dual pro chargers with the question and this is the reply I received.:     Thank you for reaching out to us here at PCS. The Sportsman series charger, although rated ay 10 amps per bank, draws only 5 amps from AC when all banks are charging. As the Professional series which provides 15 amps per bank, has a maximum AC draw of 7.5 amps with all banks charging.  
    • That’s an interesting point.  While I understand how Amps work, I can’t say I’m fully versed in the draw of modern on board chargers.   By modern code, outdoor and outbuilding outlets should be 20 Amp.  If your outside or garage outlets are 15 Amp, they’re undersized.  But that is quite possible if the garage was built before that code became enforced.   With heavy use, you may not be able to keep up on daily charging without the 10 Amp per channel charger, however that’s with very aggressive use for consecutive days.  On our June muskie trip we run up to 15 hours a day for up to 7 days on a 24V Ulterra and by mid week we’re starting to see the batteries not reach full charge.  That’s a lot of bank running at nearly 2 mph on windy shores.   We charge at a dock with up to 6 boats per dock plugged in - some with 36 volt systems.  Now I’m not sure if all the outlets are on a dedicated circuit but I’m betting they aren’t.  But they’re all 20A outlets with a lot of draw on them.  At max draw, they’re not keeping up but also not tripping the breakers.   What I’m saying, without a technical review is: you’re probably fine either way.  You probably won’t tax your batteries so much that they can’t recover on a 5 Amp per channel overnight charge and a 10Amp per channel charger probably won’t be too much to plug into your 15A outlet - if it really is a 15A.  If you’re sure, you’re sure, but I would double check if you’re not 100%.
    • Another question- I wil be running 24 volts on the trolling motor for this boat, what amperage onboard charger should I buy? Some have told me 10 amps per channel, but at full draw that would be 20 amps, and my outlets at home and where I plug in at the lake is only 15 amps, is 5 amps per channel enough to charge batteries overnite after using spotlock during the day? Thanks for the help.
    • Got a look at a condor yesterday at Pinacles national park. This was the best I could zoom with my phone.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.