Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Towing your Dropdown house with ATV?


Kylersk

Recommended Posts

I've got a 17' V-Front fish house with 280#'s of tounge weight (without my propane tanks on). I hope this tongue weight is about normal? I heard 10% is best? Not sure what my overall house weights yet...

Anyways, I've got an AC 650, it's towing capacity is 1200#'s or so, I no my house is more than that, but I swear I've seen ATV's pulling them around?

Thoughts?

Link to comment
Share on other sites

I run a similar house and put hundreds of miles on with my atv every year..but of course it is a polaris sportsman 500 with a little more towing ability....not sure on specs just know because a buddy runs an ac 650 and it really squats it down....the polaris runs close to level...moral of the story is when it comes to atvs never buy an arctic dump!!

Link to comment
Share on other sites

I agree, put more weight in the back. Maybe you could put your propane tanks in the back when moving the house. As far as hauling it the only thing you may need to worry about is stopping. Chains are nice for getting traction both for taking off and stopping.

Link to comment
Share on other sites

I'm back in the game boys and girls. Picking up my second wheel house Sunday. Got rif of my first 2 years ago. Anyways when I would bring mine out I would have someone sit in the doorway of the house to balance the weight. They would just dangle their legs and enjoy the ride. If I was by myself I would put most of my gear in the back, like those other guys said. Worked great. By the way the house looks great Kylersk

Link to comment
Share on other sites

Quote:

When you move it have a buddie or 2 ,or the wife (
if shes a big one
) ride in the back of the house when moving it, that should take half the weight off your 4-wheeler.


grin.gif Friggin hilarious! grin.gif If she's that dern big, strap on a harness, make her pull the house-you ride alongside on the ATV!! grin.gif Besides, I thought the whole point of ice fishing was to get away from our wives?! grin.gif

smirk.gif(I'm sooooo dead if my wife sees this post!) smirk.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Bighorn sheep at Lemoille canyon.   
    • Wild horses in Sparks Nevada   ad
    • Donner lake near Donner pass in California   
    • Redwoods near Big Sur California.  
    • Power output is:  amps x volts = watts   If your charger is pushing 10amp at 12 volt: 12 x 10 = 120 watts.  2 banks = 240 watts.   240 watts / 120v at your outlet = 2 amp.   Efficiency isn't 100% so it's gonna be more than 2 amp on your garage circuit, but maybe like 2.4 amps.     I think.... It's been a while, LOL.  Either way 20amps output on a charger for a 12v battery isn't the same as pulling 20amps off your garage circuit.
    • Wanderer, thank you. I did look at the breakers for my garage/outside outlets and they are 20 amp.  I reached out to the company that makes dual pro chargers with the question and this is the reply I received.:     Thank you for reaching out to us here at PCS. The Sportsman series charger, although rated ay 10 amps per bank, draws only 5 amps from AC when all banks are charging. As the Professional series which provides 15 amps per bank, has a maximum AC draw of 7.5 amps with all banks charging.  
    • That’s an interesting point.  While I understand how Amps work, I can’t say I’m fully versed in the draw of modern on board chargers.   By modern code, outdoor and outbuilding outlets should be 20 Amp.  If your outside or garage outlets are 15 Amp, they’re undersized.  But that is quite possible if the garage was built before that code became enforced.   With heavy use, you may not be able to keep up on daily charging without the 10 Amp per channel charger, however that’s with very aggressive use for consecutive days.  On our June muskie trip we run up to 15 hours a day for up to 7 days on a 24V Ulterra and by mid week we’re starting to see the batteries not reach full charge.  That’s a lot of bank running at nearly 2 mph on windy shores.   We charge at a dock with up to 6 boats per dock plugged in - some with 36 volt systems.  Now I’m not sure if all the outlets are on a dedicated circuit but I’m betting they aren’t.  But they’re all 20A outlets with a lot of draw on them.  At max draw, they’re not keeping up but also not tripping the breakers.   What I’m saying, without a technical review is: you’re probably fine either way.  You probably won’t tax your batteries so much that they can’t recover on a 5 Amp per channel overnight charge and a 10Amp per channel charger probably won’t be too much to plug into your 15A outlet - if it really is a 15A.  If you’re sure, you’re sure, but I would double check if you’re not 100%.
    • Another question- I wil be running 24 volts on the trolling motor for this boat, what amperage onboard charger should I buy? Some have told me 10 amps per channel, but at full draw that would be 20 amps, and my outlets at home and where I plug in at the lake is only 15 amps, is 5 amps per channel enough to charge batteries overnite after using spotlock during the day? Thanks for the help.
    • Got a look at a condor yesterday at Pinacles national park. This was the best I could zoom with my phone.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.