Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

CVA Kodiak?? HELP A NEWBIE OUT


Recommended Posts

I'm new to muzzleloading and could use all the advice possible. I am looking at the CVA Kodiak Magnium .50 cal. Does anyone have any experience using these, good or bad? I am also planning on shooting Triple Se7en and AeroTip bullets. I will be using this in MN for whitetails, so a scope is out of the question.

Thanks

Link to comment
Share on other sites

A couple years ago it was ranked #1 Muzzleloader on the market. If your looking to get into black powder go with a kodiak or the omega from Thompson Center. Whenever looking at the guns make sure it's a 209 primer which is a lot easier then the disk types. I am shooting Triple Seven powder and I don't notice a difference between that and the pyrdoex so I don't know if it is cleaner or not but get the 50 grain powder tablets and go from there. As for bullets haha. I've got 4 differnt types i'm playing with. Try some and see what works for ya. I'm shooting TC Shockwaves/Hornady's/Barnes/Powerbelt. I'm still trying to find out what my gun likes. But I would suggest a stainless barrel. Easier for clean up.

Link to comment
Share on other sites

I bought a CVA Kodiak Pro Magnum two years ago and I like it. I got the stainless barrel also. I am still new the blackpowder scene but it performs great for me. I would like to put a scope on it and see how it shoots at longer ranges. Dont forget to season the barrel before you hunt with it. I shot about 75-100 ball and patches through it using just one 50 grain pellet each time. Good luck and have fun!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Bighorn sheep at Lemoille canyon.   
    • Wild horses in Sparks Nevada   ad
    • Donner lake near Donner pass in California   
    • Redwoods near Big Sur California.  
    • Power output is:  amps x volts = watts   If your charger is pushing 10amp at 12 volt: 12 x 10 = 120 watts.  2 banks = 240 watts.   240 watts / 120v at your outlet = 2 amp.   Efficiency isn't 100% so it's gonna be more than 2 amp on your garage circuit, but maybe like 2.4 amps.     I think.... It's been a while, LOL.  Either way 20amps output on a charger for a 12v battery isn't the same as pulling 20amps off your garage circuit.
    • Wanderer, thank you. I did look at the breakers for my garage/outside outlets and they are 20 amp.  I reached out to the company that makes dual pro chargers with the question and this is the reply I received.:     Thank you for reaching out to us here at PCS. The Sportsman series charger, although rated ay 10 amps per bank, draws only 5 amps from AC when all banks are charging. As the Professional series which provides 15 amps per bank, has a maximum AC draw of 7.5 amps with all banks charging.  
    • That’s an interesting point.  While I understand how Amps work, I can’t say I’m fully versed in the draw of modern on board chargers.   By modern code, outdoor and outbuilding outlets should be 20 Amp.  If your outside or garage outlets are 15 Amp, they’re undersized.  But that is quite possible if the garage was built before that code became enforced.   With heavy use, you may not be able to keep up on daily charging without the 10 Amp per channel charger, however that’s with very aggressive use for consecutive days.  On our June muskie trip we run up to 15 hours a day for up to 7 days on a 24V Ulterra and by mid week we’re starting to see the batteries not reach full charge.  That’s a lot of bank running at nearly 2 mph on windy shores.   We charge at a dock with up to 6 boats per dock plugged in - some with 36 volt systems.  Now I’m not sure if all the outlets are on a dedicated circuit but I’m betting they aren’t.  But they’re all 20A outlets with a lot of draw on them.  At max draw, they’re not keeping up but also not tripping the breakers.   What I’m saying, without a technical review is: you’re probably fine either way.  You probably won’t tax your batteries so much that they can’t recover on a 5 Amp per channel overnight charge and a 10Amp per channel charger probably won’t be too much to plug into your 15A outlet - if it really is a 15A.  If you’re sure, you’re sure, but I would double check if you’re not 100%.
    • Another question- I wil be running 24 volts on the trolling motor for this boat, what amperage onboard charger should I buy? Some have told me 10 amps per channel, but at full draw that would be 20 amps, and my outlets at home and where I plug in at the lake is only 15 amps, is 5 amps per channel enough to charge batteries overnite after using spotlock during the day? Thanks for the help.
    • Got a look at a condor yesterday at Pinacles national park. This was the best I could zoom with my phone.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.