Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Camera Question.


Gordie

Recommended Posts

I was given a vs350 as a gift from my kids last January and it works great My question is it is a black and white monitor and was wondering if you can make it color by adding a color monitor or is it the camera that makes it color.I belive that this unit is made in anoka MN. any info will be greatly appreciated

Link to comment
Share on other sites

thanks iffwalleyes ill give it a try and let you know what i come up with. I was going to try it but the cable that plugs into the monitor from the camera is differnt and no place on tv to plug it into.computer monitor is differnt also. Ithink I need some tpye of adapter?

Link to comment
Share on other sites

Color cameras for underwater use in fresh water was attempted, but found to be a waste of technology- with walleyes being mostly white and grey, and our plantlife is sort of lifeless.

Color cameras of this technology are LOWER resolution, notably. The black and white technology is over 100 lines of resolution higher- example, an Aqua Vu Z series type cam, the older rubber armoured ones, were 420 lines of resolution, black and white. The best color cameras for this application are about 330 lines of res. The color underwater cams are a hit in saltwater, the water clarity is better, and the fish and terrain better appreciated in color. For Minnesota, black and white is where it's at- good question though, most people would not know the difference.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Bighorn sheep at Lemoille canyon.   
    • Wild horses in Sparks Nevada   ad
    • Donner lake near Donner pass in California   
    • Redwoods near Big Sur California.  
    • Power output is:  amps x volts = watts   If your charger is pushing 10amp at 12 volt: 12 x 10 = 120 watts.  2 banks = 240 watts.   240 watts / 120v at your outlet = 2 amp.   Efficiency isn't 100% so it's gonna be more than 2 amp on your garage circuit, but maybe like 2.4 amps.     I think.... It's been a while, LOL.  Either way 20amps output on a charger for a 12v battery isn't the same as pulling 20amps off your garage circuit.
    • Wanderer, thank you. I did look at the breakers for my garage/outside outlets and they are 20 amp.  I reached out to the company that makes dual pro chargers with the question and this is the reply I received.:     Thank you for reaching out to us here at PCS. The Sportsman series charger, although rated ay 10 amps per bank, draws only 5 amps from AC when all banks are charging. As the Professional series which provides 15 amps per bank, has a maximum AC draw of 7.5 amps with all banks charging.  
    • That’s an interesting point.  While I understand how Amps work, I can’t say I’m fully versed in the draw of modern on board chargers.   By modern code, outdoor and outbuilding outlets should be 20 Amp.  If your outside or garage outlets are 15 Amp, they’re undersized.  But that is quite possible if the garage was built before that code became enforced.   With heavy use, you may not be able to keep up on daily charging without the 10 Amp per channel charger, however that’s with very aggressive use for consecutive days.  On our June muskie trip we run up to 15 hours a day for up to 7 days on a 24V Ulterra and by mid week we’re starting to see the batteries not reach full charge.  That’s a lot of bank running at nearly 2 mph on windy shores.   We charge at a dock with up to 6 boats per dock plugged in - some with 36 volt systems.  Now I’m not sure if all the outlets are on a dedicated circuit but I’m betting they aren’t.  But they’re all 20A outlets with a lot of draw on them.  At max draw, they’re not keeping up but also not tripping the breakers.   What I’m saying, without a technical review is: you’re probably fine either way.  You probably won’t tax your batteries so much that they can’t recover on a 5 Amp per channel overnight charge and a 10Amp per channel charger probably won’t be too much to plug into your 15A outlet - if it really is a 15A.  If you’re sure, you’re sure, but I would double check if you’re not 100%.
    • Another question- I wil be running 24 volts on the trolling motor for this boat, what amperage onboard charger should I buy? Some have told me 10 amps per channel, but at full draw that would be 20 amps, and my outlets at home and where I plug in at the lake is only 15 amps, is 5 amps per channel enough to charge batteries overnite after using spotlock during the day? Thanks for the help.
    • Got a look at a condor yesterday at Pinacles national park. This was the best I could zoom with my phone.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.