lunker-1967 Posted April 24, 2015 Share Posted April 24, 2015 I have a 2004 18' Lund Fisherman with a Honda 150 and am looking at adding a kicker motor to the boat. I would preferably put another Honda motor on it, but am not against putting another brand motor on it either. I would like some input from others that have done this concerning -- Cost, Service, Dealer info, Brand, Size of motor, Warranty, Fuel economy, Self install or Dealer install and any other info that may be helpful with this project. I am from the Alexandria, Mn area so I am looking for dealer/service information (good, bad or terrible) within a reasonable distance. Thanks to any and all advice in advance. Quote Link to comment Share on other sites More sharing options...
ClownColor Posted April 24, 2015 Share Posted April 24, 2015 I don't own a kicker but bought a small engine (4 stroke 4 hp) last year to accompany a small row boat for metro lakes. When I did my research, I found most of the smaller motors were made by one manufacture. Not true for every make/model but it seemed legit looking at the specs. I went with the best deal I could find. Most are gonna run the same and perform the same. Regarding maintenance, my 2 cents is most all boat motor repair shops can work on most all boat motors.Note that I was looking at the 2-6hp range...9 and above may be different Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.