Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. 😀

  • Connect, BE BRAVE - We Share Fishing Reports & Outdoor Information Here

       
        "Post Your Thoughts" - Leave YOUR mark, make each place you visit "a little better"! Post please......

        Because you want others to share great outdoor information with you!!!! Share what you 'love about your area' in the outdoors.

        EMOJI those posts you 'appreciate, please...IF YOU WANT MORE LIKE IT HERE..'

        Have Fun!!!

  • ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Welcome to HSO @Garmin Nuvi. Your post sounds kind of spammy. If you're for real, message me and we will let you link to your safe site.
    • If all you're running are lights and the furnace, a 15A circuit would be more than adequate, which would be 14ga. The wire lengths involved are minimal so voltage drop should not be a concern.
    • Uni knot I use for all the time for leaders braid and fluoro. No glue needed
    • Standard auto/trailer lights, clearance, signal, break etc. use 16AWG wire. There based on 13.8vdc (altimeter charging voltage) with a 5% volt loss for wire length. Inside your Yetti, the greatest 12vdc current draw will be your furnace, 35,000 BTU suburban draw 9 amps. Fishing electronics (FL-8 205ma, FL-28 275 ma, camera 300ma, 12v TV 480ma) 1000ma = 1Amp. Use LED lights, the draw about 20% current compared to iridescent lights.If you decide to use a 12vdc to 120vac converter to charge your auger batteries, I suggest you direct connect the converter to your battery with wire and clamps provided.  Wire size calculator to help decide what you need https://www.wirebarn.com/Wire-Calculator-_ep_41.html
    • Voltage drop needs to be considered as well that is the only reason why I am thinking of just going with 12 AWG. I was just thinking of buying a roll each of red and black stranded THHN for 12VDC but curious if that be a bad idea and should use something like a marine type cable but that seems over kill?  https://www.amazon.com/American-Tinned-Oxygen-Copper-Sheathed/dp/B0799HTZB5/ref=mp_s_a_1_12?keywords=marine+cable&qid=1580136110&sprefix=marine+cable&sr=8-12
    • Or read and follow the instructions that came in the box with your new Garmin Nuvi GPS with Lifetime updates. And Not hit unsafe Links on Internet sites that really don't apply with the sites subject matter!  😉
    • got ya, my pellet smoker goes down to 150, that's why I was wondering...  I have done all the chicken cuts too except wings!!!
    • It all depends on the load you intend to be using. The higher the amperage draw the thicker the wire you will need so it doesn't overheat the wire. Led's use a fraction of an amp. 12 gauge is for heavy draw and is what I use for an extension cord from the generator to my house. 
    • I like a lot of different lures, but fishing stained waters, I usually start out with a chrome blue Rippin' Rap #7. H L
    • Guinness battered and fried with a dash or two of malt vinegar is another favorite.
  • Topics

×
×
  • Create New...