tomfromblaine Posted April 22, 2012 Share Posted April 22, 2012 Hi there folks, I'd like some direction on my bilge pump, tried checking previous posts with no luck. I have 2 questions,,, 1) where is the fuse located? 2)how do I get the pump out if its not the fuse? I can see it, just don't know how to approach it other than check fuse first.Thanks in advance with any info you can share.Tommy T. Quote Link to comment Share on other sites More sharing options...
guyonacouch Posted April 22, 2012 Share Posted April 22, 2012 I just got done sorting out some bilge problems, so hopefully I can help a little. I'm guessing your bilge fuse is located within the fuse box - at least that's where mine is at on my Lund. I kept blowing fuses and was thinking it could be a corroded wire or the pump was stuck because of dirt build up. My pump comes out of its mounted housing by twisting counterclockwise a half turn (it doesn't turn out easy - but there are finger grips to get some torque on it). Once out, the motor was stuck and I just turned it free by hand and now it's running good. Hopefully yours is an easy fix too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.