mnvikingsfreak Posted April 16, 2012 Share Posted April 16, 2012 Has anyone ever made their own trailer guide on's? After looking at them online they look simple just metal pipe bent at 90 degrees with pvc pipe on the outside. Any advice or building plans on how to make the pvc version I listed above or the long 5' bunk guides? Loading in the wind and by myself would be so much easier. Quote Link to comment Share on other sites More sharing options...
Alagnak Posted April 17, 2012 Share Posted April 17, 2012 Sounds like u just made some plans! Angle iron or round or square tubing will work. You can either weld it to the trailer or use u bolts. Give yourself a few inches of room to spare, make them tall enough to see and helps with backing up empty trailer too if its a narrow trailer. You can even mount your lights up there out of the water. PVC tube slid over works great. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.