mrpike1973 Posted April 13, 2012 Share Posted April 13, 2012 hi i want to put wiring in for a trailer. can i just splice in on the left side where the wiring goes in to the light. the jack storage area looks like i can get it in there. i believe i just need 4 wire flat system i believe thanks 2002 chrysler town and country fwd, 150,000 miles Quote Link to comment Share on other sites More sharing options...
Jeremy airjer W Posted April 13, 2012 Share Posted April 13, 2012 I think the 2002 uses a single bulb for the tailight/turn signal/brake light. If so than yes you can splice off the wiring behind the lens assmebly. You will need to remove both of the lense assemblies to do those not the interior trim.If this has seperate turn and brake light bulbs that you will need a plug and play harness specifically for you vehicle. Quote Link to comment Share on other sites More sharing options...
fishhuntwork Posted April 13, 2012 Share Posted April 13, 2012 I wouldn't even bother doing that, go to a dealership by a harness for it. Very simple to install and a lot better than having butt connectors. All you do is take off both taillamp assemblies and then plug and play connectors. I've done probably hundreds of them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.