eelpout50 Posted April 5, 2012 Share Posted April 5, 2012 I have oil bath hubs on my trailer and the rear seals on both sides are leaking. I have never delt w/ these before. Are they a pain to work on? Are the seals difficult to find? How do I find the correct size? Quote Link to comment Share on other sites More sharing options...
JohnMickish Posted April 6, 2012 Share Posted April 6, 2012 The seals should not be any harder to find than any other seal, and changing them out is the same as on a grease hub. Do a video search on the subject and you will find all the info you need. Check the manufacturer of your hub for the oil they recomend, but I'm going to guess it's going to be straight 50W, non synthetic.One tip, set the oil bottles on the driveway in the sun for awhile so the oil thins out a bit and flows better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.