Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Techique ?


unfrozen

Recommended Posts

Last year it was mostly pitching a weightless worm to cover on my baitcaster and wacky rig on my spinning setup. Before that, it was spinnerbait, spinnerbait, spinnerbait, crankbait on the baitcaster. I used the spinning setup for pannies. wink

Didn't really get into plastics or jigs until last season and I plan to continue feeding that addiction this year.

Link to comment
Share on other sites

My most used baits were tubes on the spinning and jigs and texas rigs on the baitcaster.

This was one of the first years i used jigs, and i used texas rigs more this year than past years. I caught more fish and bigger fish on jigs and texas rigs this year than i ever had before. They are now a "go too" bait for me and i will alway have a jig, Strike King Coffee tube, and a Brush Hog at the ready.

Link to comment
Share on other sites

not a fan of spinning rod here either so for me its usually a baitcaster. If i do anything with a spinning rods its either shakey head or weightless softplastic jerkbait. I love pitching jigs or creature baits into heavy cover and around docks with a baitcaster though.

Link to comment
Share on other sites

With a baitcaster the majority of the time it will be a jig, but t-rigs, spinnerbaits, swimbatis, and cranks also see use.

With spinning gear I'll throw dropshots, tubes, shakey heads, and weightless plastics(mostly flukes or wacky rigged Senkos).

Link to comment
Share on other sites

Hiya -

Casting: flipping/pitching, jig and pig, football heads, texas rigging, carolina rigging, shallow and big deep diving cranks, rattle baits, hard swimbaits, spinnerbaits/buzzbaits, swim jigs, walk the dog topwaters, spoons and frogs.

Spinning: jigworms, grubs, finesse jigs, weightless plastics, skipping, tubes, jerkbaits, small cranks, topwaters, drop shot, split shot, soft swimbaits, hair jigs.

Link to comment
Share on other sites

I'm starting baitcasing so none for bait casting yet.

spinning - jigs, cranks, spinners, top water, frog, rattle traps.

What I realized is you can use what ever you like. Whether is cranks, spinners, jigs, or top water. When using a lure or jig you just have to find the right color and retrieve. So go with what you like. You will try them all and either like them all or come back to what ever it is you liked first.

Link to comment
Share on other sites

I don't carry a spinning rod in my boat anymore. Everything is baitcaster. My #1 go to is texas rigged worm or hog. I have a 7'6" G Loomis that I use for my jig worm and an 7'11" G Loomis walleye rod that I use for drop shotting, it is incredible sensitive. There isn't anything that can't be thrown, with practice of course, on a good baitcasting setup.

Link to comment
Share on other sites

I may carry 1 spinning rod in the boat, it may get 5 percent of my use. I feel I can do everything better on a bait caster. I will use a spinning rod when I throw a shakey head, or drop shot. The bottom line is for me I am far more accurate and efficient with a bait caster.

Link to comment
Share on other sites

When it comes to largemouths, I have been 100% baitcast, but this year I am going to drop-shot and am adding spinning gear more and more to the lineup. Gotta be versatile, at least on the pressured waters where I fish. Frogs will be new for me too this year. Bring on the open water!!!

Link to comment
Share on other sites

Casting: flipping/pitching, jig and pig, football heads, texas rigging, carolina rigging, shallow and my big deep diving cranks, Lipless crankbaits, hollow belly swimbaits, spinnerbaits/buzzbaits, swim jigs, topwaters - like poppers or skitter pop type plugs, and of course a variety of frogs in the shallow slop.

Spinning: jigworms, weightless plastics, skipping under docks with tubes, jerkbaits, and stick baits, and occationally small-shallow cranks. I've tried drop shottin a few times but due to lack of confidence and lack of a quick bite / reward I didn't use it often and usaually oppted back to baitcasting and using a jig or t-rigged worm. I'll typically have about 8-10 baitcasting settups along with 1-2 spinning at anytime. I lean towards the baitcasters but am not hesitent to use the spinning if it fits into a pattern that is producing. I don't know of many anglers that are too good at skipping a very light wackyrigged senko, tube, or weightless worm twenty plus feet under a dock with 6-10 inches of clearence without backlashing. I can do that with a spinning set up but wouldn't try it with a baitcaster so its a no brainer at times. Plus it's hard to get good long casts out of a baitcaster when casting into the wind with a shallow running-light, baby minus one crank.

Link to comment
Share on other sites

I love baitcasters because there is no line twist as with spinning reels. There is the occasional spool over run with the baitcasters-- tho there is less of them. The only thing I use spinning reels for is skipping docks and drop shotting. I'm slowly learning to do each with baitcasters tho. Anyone else had their fill of ice fishing yet? My wife can't believe the amount of fishing shows I can watch.

Link to comment
Share on other sites

I strictly use spinning rods when I chase bass. My baitcasters are for still fishing bait (usually in rivers) or hucking big stuff for big pike and 'skis.

As far as my favorite technique.. that's a tough one. I switch between senkos, paddletail swimbaits, and crankbaits mostly.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.