Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Keeping Eurolarvae


macminn

Recommended Posts

I fished 2 weekends ago, and had a bunch of eurolarvae left over. I put them in my fridge, just checked on them to see how they were doing, and they were hard as a rock, and not moving very fast. OK, not moving at all.

I was thinking of buying them in bulk at the V shop in the Northern burbs, but not sure how to keep them.

Thanks in advance.

Link to comment
Share on other sites

I buy them there all the time, I just put them in the fridge and there fine. Did they turn black and get hard? Because that's what they do when they turn in to flies. Maybe your fridge is to warm? Heck my larve have been in and out of the fridge a bunch of times and their all still good to go.

Link to comment
Share on other sites

I do the same as Jim and when I purchased a box of 1,000 at the beginning of the season, I add a few drops of water to the sawdust or whatever the compound is that is in the container with them.

I usually sell a few hundreds to friends and if I do have a little death, it still works out as one can purchase them so cheap by the 1,000.

If the stuff dries out, it seems I do get a little death.

I can keep them for months.

Link to comment
Share on other sites

harvey lee, where are you finding the euros in bulk? Are you ordering off the internet, or is there a local shop that you buy from? I was just thinking over the weekend about whether a bulk purchase would make sense for the future, but haven't started looking for sources yet.

Thanks,

Tom.

Link to comment
Share on other sites

I have had them die shortly after fishing on occasion. I think that maybe they may have actually got too cold (nearly frozen)while I was fishing, and that may have been the cause. Or maybe some of the leftovers in the fridge scared them to death.

Link to comment
Share on other sites

euros are fly larva. i have always wondered how fly's survive 20 below temps. last summer i left my camper up north at a freinds property for the summer and when i picked it up after a cold winter there were thousands of flys in there. clean camper and one big mess of fly's. good luck.

Link to comment
Share on other sites

I had a bait store guy tell me that they are different then waxes that you can leave out warm for a while. He said they need to be kept cool as they will start to turn into the fly. When they cool down they go dormant because it slows down their metabolism but if kept warm they will turn quick. That's why when you take them out they are hardly moving and once they warm up again they are off to the races in their container! If your frig is to cold or has cold spots on the edged like mine, you maybe freezing them? wink

Link to comment
Share on other sites

i also buy them in bulk at the beginning of the year and they last all winter long. alot of the time they will start to die off if they are kept warm too long. like said before, its best to keep them refridgerated. i keep mine out in the garage fridge since the wife doesnt want them in the house. when it gets really cold, i wrap a hand towel around them inside the fridge and this keeps them from freezing. ive noticed that if they freeze, they will die as well. the reason for keeping them cold but not to a freezing point is because it keeps them dormant. if you open up your puck or whatever you are storing them in and they are moving like crazy, they will not live very long. and i have also learned the hard way. in the spring time rememeber to empty out the old larvae out of the puck or else you will be swarmed by GIANT flies when you open them...haha. only took time for me to learn that one. hope this helps

Link to comment
Share on other sites

The past couple years, I have bought 5000 right after Thanksgiving. They lasted me all last year, and this year, they are still good. I go through them every couple of weeks and pick out the few dead ones there are. I also just keep them in a plastic sandwich container, in the bottom drawer of the fridge. Vados little sheet says to change the saw dust when it gets wet, but I just took them out of it entirely a week ago and they seem to be fine.

Link to comment
Share on other sites

I go through them every couple of weeks and pick out the few dead ones there are.

They aren't dead, their in the pupae form. I knew that but didn't think they would ever hatch out but I threw a bunch of the brown/red ones in the basement garbage a few times. A week or so later we had a bunch of big flies cruising around. I'm finally killing the last of the few remaining flies.

Link to comment
Share on other sites

The ones I throw out for the most part are dead, I keep them cold enough that they don't start to change. Seems like the ones that do are the ones that go in my bait puck and do get warm from beaing in my pocket. I also never threw them in the garbage in fear of them changing, I've always tossed them out and wathed the birds eat them. grin

Link to comment
Share on other sites

The ones I throw out for the most part are dead, I keep them cold enough that they don't start to change. Seems like the ones that do are the ones that go in my bait puck and do get warm from beaing in my pocket. I also never threw them in the garbage in fear of them changing, I've always tossed them out and wathed the birds eat them. grin

Ha, good idea. I now feed mine to my sunfish and perch. smirk

Link to comment
Share on other sites

harvey lee, where are you finding the euros in bulk? Are you ordering off the internet, or is there a local shop that you buy from? I was just thinking over the weekend about whether a bulk purchase would make sense for the future, but haven't started looking for sources yet.

Thanks,

Tom.

Vados bait in the cities ands they will ship to you. I buyt the spikes in the assort colors.

It is for sure the least expensive way to buy them.

Link to comment
Share on other sites

I've noticed something interesting with the ones in assorted colors. When they start to go bad, the colored ones go bad long before the natural ones. I think I'm going to just buy the natural ones from now on.

I just keep them in the top-front (warmest) part of the fridge in a bait puck, keeps the natural ones long enough for me to use them.

Link to comment
Share on other sites

I've noticed something interesting with the ones in assorted colors. When they start to go bad, the colored ones go bad long before the natural ones. I think I'm going to just buy the natural ones from now on.

I just keep them in the top-front (warmest) part of the fridge in a bait puck, keeps the natural ones long enough for me to use them.

Noticed the exact same thing!

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.