panfishpounder00 Posted November 29, 2010 Share Posted November 29, 2010 hello, i am currently looking at up grading my spring bobber set-ups to the st.croix style. i know that most guys are using a size 8 guide to fit oonto the tip top, but what size grommet fits that guide? Quote Link to comment Share on other sites More sharing options...
harvey lee Posted November 29, 2010 Share Posted November 29, 2010 I do not remember the actual size needed but I took the guide to the NAPA parts store and went through the box and found it. Almost all Auto parts stores should have them and many hardware stores also.I would also take the spring with so you can place the grommet in the guide and then check to see if the spring fits nicely and not to tight. I keep mine so I can at least move the spring back and forth to change the tension on the spring.Good luck. Quote Link to comment Share on other sites More sharing options...
A.W.Wolfram Posted November 30, 2010 Share Posted November 30, 2010 The ID on the single foot 8 rings that I use is .222Hope that helps Quote Link to comment Share on other sites More sharing options...
pulleye16 Posted December 4, 2010 Share Posted December 4, 2010 1/8 ID 11/32 OD on a #8 guide single foot eyelet Quote Link to comment Share on other sites More sharing options...
panfishpounder00 Posted December 5, 2010 Author Share Posted December 5, 2010 thanx guys for the help!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.