1900_LE Posted February 17, 2009 Share Posted February 17, 2009 I want to put a foot trim switch on my boat. I have a 08 75hp yamaha tiller. Where is the best place to tap into the wires to do this? There is a trim/tilt on the side of the motor. There is also one on the throttle. I've found the wires, but can't see where I could get them thru the lower cowling where all the other wires, fuel line, etc. go thru. The wires from the throttle trim enter the lower part of the cowling on the underside. Should I tap into them there? Or is there a better place. I don't want it to look sloppy. Thanks for any help. Quote Link to comment Share on other sites More sharing options...
1900_LE Posted February 18, 2009 Author Share Posted February 18, 2009 Never mind.....I got it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.