Shack Posted December 5, 2008 Share Posted December 5, 2008 I figure I would share this with you guys and gals! "> " type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> If their is any interest, I will share further "how to" videos, like assembling as flip over shack and other things. If their is no interest, I will not waste yours or my time I know most know how to do this stuff, but I figure some out their have not done this and would like to know how. Thanks! Quote Link to comment Share on other sites More sharing options...
0 Shack Posted December 5, 2008 Author Share Posted December 5, 2008 Thanks again guys! Quote: Is this a process you can do while the canvas is on your sled? Yes you can. I would use some saw horses or right on the ground. You might another person helping also. The weight of the sled with the cover on would be the only issue, but I think it will go almost just as simple. Good luck! Quote Link to comment Share on other sites More sharing options...
0 CraigM Posted December 5, 2008 Share Posted December 5, 2008 I did my old shack with the canvas on. It definately makes it harder but still is not that big of a deal. One trick that I found helps quite a bit is to put that first bolt in at the front of the sled then use a heat gun to soften the hyfax at the bend. It lays right down and you don't have to fight it. Quote Link to comment Share on other sites More sharing options...
0 boatfixer Posted December 6, 2008 Share Posted December 6, 2008 Good job Shack. Does anyone know where to get a set for the eskimo houses? If done a search and cant even find a part#. Quote Link to comment Share on other sites More sharing options...
0 fishwater Posted December 6, 2008 Share Posted December 6, 2008 I don't know what the bottom of an Eskimo looks like, but you could use an otter hyfax kit in all likelihood. I think the otter kits are way better than the clam ones, so don't use a clam kit. The otters have thicker material. Quote Link to comment Share on other sites More sharing options...
0 fishNcrappie Posted December 6, 2008 Share Posted December 6, 2008 great vid! thats why i like this site. people always sharing info. work smarter not harder! i just put a frabill fortress together the other day. didnt even think about using a smaller drill bit to help hold bolt better. was a pain in the (_|_) trying to reach around inside/outside on the bend. thanks for sharing! Quote Link to comment Share on other sites More sharing options...
0 tunrevir Posted December 6, 2008 Share Posted December 6, 2008 Cool vid Shack and thanks for sharing. I need to get some hyfax for my eskimo put on to save the tub and this will really help with the install!Tunrevir~ Quote Link to comment Share on other sites More sharing options...
0 Shack Posted December 6, 2008 Author Share Posted December 6, 2008 Good job Shack. Does anyone know where to get a set for the eskimo houses? If done a search and cant even find a part#. boatfixer Just like fishwater said, you can use Otter Hyfax if it will fit. You could look at how mine went on, measure yours and call down to T-bros and find out what size will be close to fit your eskimo. Does the eskimo shacks have a molded area for Hyfax to fit into, or is it just a flat molded in runner under the sled? It should just bolt on and warp up on the front. I am glad this video is helping people. Quote Link to comment Share on other sites More sharing options...
0 UMDSportsman Posted December 6, 2008 Share Posted December 6, 2008 Good job Shack. Does anyone know where to get a set for the eskimo houses? If done a search and cant even find a part#. I picked up a set for my father's eskimo at Marine General in Duluth last year. Quote Link to comment Share on other sites More sharing options...
0 boatfixer Posted December 6, 2008 Share Posted December 6, 2008 Thanks Sport, I'm going to Duluth Monday anyway, I'll look there. I did find a part number so I might just call Russ and see if they have them. Quote Link to comment Share on other sites More sharing options...
0 BoxMN Posted December 8, 2008 Share Posted December 8, 2008 I just did mine Fri night, following the advice, and holy cow was it easy! I just laid my sled on my tailgate and the stairs going into cabin, so I didn't even have to bend over! Only for the first nut did I have to go "under" the sled. I got up to cabin and found I didn't have hack saw, so how to cut the allen wrench... I did have a bolt cutter, so used that. Worked great, but if anybody does that tape it cause it flies like rocket when cut, ha! Two drills would work best, one with the drill bit, the other with the allen wrench end to screw bolts in. Then flip the sled over and just use nut driver bit on drill, and you are done in no time. I think I did my magnum sled in just one beer! That was fast ha! Quote Link to comment Share on other sites More sharing options...
0 Shack Posted December 9, 2008 Author Share Posted December 9, 2008 Quote: Two drills would work best, one with the drill bit, the other with the allen wrench end to screw bolts in. Yep, if you have a second drill this works best. I thought of it about a 1/4 way threw, but just the allen wrench was going good and I guess the basement seemed to far down to walk and get a second drill when I was in the grove Some of those cheap drill bit sets with all the different sized Phillips, square and socket bits might have an 1/8" allen bit in them. Then you would just have just chuck up the extension and pop in the allen nit. Good to hear it went good and easy for ya Box Quote Link to comment Share on other sites More sharing options...
0 Northlander Posted December 9, 2008 Share Posted December 9, 2008 Nice video man. That going 1 size smaller on the hole really works good. I recomended that to everyone I sold Hyfax to at the show. Sure makes it easier when doing it alone.Whats the next video? Maybe installing the poles? Quote Link to comment Share on other sites More sharing options...
0 callaway Posted December 9, 2008 Share Posted December 9, 2008 couldn't you get away with only 3 versus 6? Quote Link to comment Share on other sites More sharing options...
0 Zaraspooks Posted December 9, 2008 Share Posted December 9, 2008 I've been thinking of adding the hyfax to my Yukon but I'm not real excited about drilling a bunch of holes in the bottom of the sled. Alot of times when fishing, there is standing water on the ice. I don't want the sled to leak and get everything inside wet. Do you recommend caulking the holes or is leakage not an isse? Quote Link to comment Share on other sites More sharing options...
0 jwhjr Posted December 9, 2008 Share Posted December 9, 2008 I put silicone on the inside because I was worried about the same thing. I haven't had any leaks yet. Quote Link to comment Share on other sites More sharing options...
0 jumboperch Posted December 9, 2008 Share Posted December 9, 2008 Great video shack! keep them coming. I alway said that I should put some hyfax on my house put thought it was harder than that. I'm going to do that this weekend. Thanks for the video. Quote Link to comment Share on other sites More sharing options...
0 Shack Posted December 9, 2008 Author Share Posted December 9, 2008 Yep, the next one is in the works If life slows down a little for me, it should be up this weekend. As for the holes leaking water, I just do not see it, especially if you use the smaller bit. Every thing is so tight, washers on both sides, bolt threaded into plastic, nut tightened, I seen no reason to put silicone any where. Quote Link to comment Share on other sites More sharing options...
0 Jeremy airjer W Posted December 12, 2008 Share Posted December 12, 2008 I put the hyfax on the new otter last night. You're tip on using the 5/32" drill worked great. I remember putting it on my first one and struggled a little (mostly from lack of experience!!!). The other thing I did last night is used a heat gun to really warm up the area that bends. It made a really nice tight fit and almost laid flat without installing the second screw.I'm looking forward to getting the Cottage out tomorrow to break it in at the first ice event in Duluth!!Excellent post/video Shack! Quote Link to comment Share on other sites More sharing options...
0 Fredd Posted December 13, 2008 Share Posted December 13, 2008 I struggled a bit installing my hyfax this AM on my small tub. First of all the washers are too big for the holes and the pounding it takes to get them seated into their place can't be good for the hyfax or the sled. The other issue I had was the last set of holes didn't fit within the runner as I worked my way down the ski (and yes I did have the farthest hole forward on the hyfax to the front of the sled). I tried to manufacture new holes across the back line of the hyfax, but doing the countersunk holes is a nightmare because of how aggresssive this material is to drill. My end result is that I have a bent sled bottom, extra holes in both my hyfax and tub and a frustrated experience. I am going to call Monday and share my experiece with Otter. I need to go fishing to relieve some stress. AAAGGGGHHHHH!!!!! Quote Link to comment Share on other sites More sharing options...
0 Chode2235 Posted December 24, 2008 Share Posted December 24, 2008 Thanks for posting the great video. With most projects like this the hardest part is getting the confidence to start. The instructions made it seem as easy as it really was. Thanks again for putting this together.Note: This was my first hyfax install, and do the nuts self tighten or do I need a buddy on the other side holding the allen wrench? Not all of them tightened up as I thought they should. Quote Link to comment Share on other sites More sharing options...
0 DTro Posted December 5, 2009 Share Posted December 5, 2009 Seemed like a good time to bump this one up to the top Quote Link to comment Share on other sites More sharing options...
0 jwhjr Posted December 6, 2009 Share Posted December 6, 2009 I used this a month ago when I installed it on the new sled. The 5/32" bit tip was great. Quote Link to comment Share on other sites More sharing options...
0 PierBridge Posted December 15, 2009 Share Posted December 15, 2009 Bump! Quote Link to comment Share on other sites More sharing options...
0 PierBridge Posted December 7, 2011 Share Posted December 7, 2011 Bump. . . . Quote Link to comment Share on other sites More sharing options...
0 DTro Posted December 8, 2011 Share Posted December 8, 2011 I tell ya what, with an 1/8" drill bit and a power drill and socket, you can whip this out in about 15 min. Drill holes, Drive screws/washers....flip over and secure nuts. As long as you don't go overboard with the torque on either side, you are golden. I recently read a tutorial on doing this with duct tape, ratchet, and manual nut driver which of course will work, but man that's a lot of ratcheting, and I'm a little like Tim Allen when it comes to this stuff. POWER Quote Link to comment Share on other sites More sharing options...
Question
Shack
I figure I would share this with you guys and gals!
If their is any interest, I will share further "how to" videos, like assembling as flip over shack and other things.
If their is no interest, I will not waste yours or my time
I know most know how to do this stuff, but I figure some out their have not done this and would like to know how.
Thanks!
Link to comment
Share on other sites
50 answers to this question
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.