buddha Posted December 1, 2008 Share Posted December 1, 2008 I did a search and couldn't find out who does the blade sharpening? Any help would be great.Thanks, Quote Link to comment Share on other sites More sharing options...
Mike Stark Posted December 1, 2008 Share Posted December 1, 2008 frankbdeluca@yahoo screen name Surface Tensionhe has a lot of posts on the BWCA forum...check it out or post there Quote Link to comment Share on other sites More sharing options...
Todd_J Posted December 1, 2008 Share Posted December 1, 2008 Sha-zam!http://www.fishingminnesota.com/forum/ub...ice#Post1219226 Quote Link to comment Share on other sites More sharing options...
dodger31 Posted December 1, 2008 Share Posted December 1, 2008 Does anyone know if there is a different blade assembly for the hand auger and power auger? I tried the hand auger attachment arm the other night and couldn't cut for [PoorWordUsage]. It never seemed to get started. Any help on this would be great.Thanks,Dodger Quote Link to comment Share on other sites More sharing options...
Duffman Posted December 1, 2008 Share Posted December 1, 2008 Just a heads up, the Nils hand auger is a two handed motion, one in a little circle, the other in a larger circle. That might be your problem?It takes a little time to get used to, but once you have it down, it's a breeze to make swiss cheese out of early ice. Quote Link to comment Share on other sites More sharing options...
Todd_J Posted December 1, 2008 Share Posted December 1, 2008 Does anyone know if there is a different blade assembly for the hand auger and power auger? I tried the hand auger attachment arm the other night and couldn't cut for [PoorWordUsage]. It never seemed to get started. Any help on this would be great.Thanks,Dodger There is two different cutting heads, but I don't think that is the issue. I have the standard cutting head on mine, and it cuts just as great in either the hand or powered configuration. The center point blade serves to drill a point for the main blade. I don't have exp using this one....Sounds like you need a sharpening. Quote Link to comment Share on other sites More sharing options...
harvey lee Posted December 1, 2008 Share Posted December 1, 2008 I don't know where you purchased it but I have heard of some that were sold in the back room of Cabelas in the bargin cave that were returns that had bent auger shafts. I don't know this is your problem but if the tip is new, it could be the issue. Quote Link to comment Share on other sites More sharing options...
Finn Posted December 2, 2008 Share Posted December 2, 2008 Nils has a factory service center in MA for blades. Check it out www.nilsmaster.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.