Guests - If You want access to member only forums on HSO. You will gain access only when you sign-in or Sign-Up on HotSpotOutdoors.

It's easy - LOOK UPPER right menu.

Sign in to follow this  
Followers 0
bass_hunter

1969 johnson 55 hp starting and shifting

4 posts in this topic

HI I have a 1969 johnson 55 hp hydroelectric engine. There is three controls on it. The shifter, throttle, and then there is a toggle switch witch has three positions. I know it needs to be in neatrual and the throttle has to be in the start position, but I am wondering what position the toggle switch has to be in to run. The guy I bought it from did not tell me that.I would apperciate the help.

Share this post


Link to post
Share on other sites

Sounds like your fast idle. Some controls don't use that lever, instead you disengage the sift and push the throttle froward to fast idle.

Share this post


Link to post
Share on other sites

Is there a way for you to post a picture of it?

Share this post


Link to post
Share on other sites

I should have read better. Toggle switch, scratch the fast idle lever.

It could be trim switch. Can you post a picture.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  
Followers 0



  • Posts

    • Oh yeah.  I keep forgetting about all that modern computer stuff in cars.   So the computer would notice the tranny didn't shift all the way down as the car stopped?     There goes that theory.    And why only after a couple hours of driving?   Some sort of overheating of the transmission fluid?  cooler plugged in the flush process?    Here is a question for Carpmaster..... Is it different in the summer vrs winter?   Like you only have to drive 50 miles in summer and 200 in winter?   You guys that actually know can feel free to ignore my suggestions if you don't want to waste time answering.  
    • leech, it does sound like an odd concocktion.  but you gotta try it.  225 for 2 hrs, helps if u use thin bacon.
    • nw wisconee private marsh
    • Sorry, I thought the model was listed on the title of my question.  Anyway, Garmin 53dv EchoMap.  This one has downview, but is chirpless.  Seems like nice unit, tough.  Just wondered about those 2 wires.  Thanks.
    • should trigger a check engine light....
    • OK, just from what I am reading and never having been to mechanic school.... Is it possible that when the car comes to a stop that the transmission doesn't, for reasons unknown, downshift to first but stays in a higher gear?  Then when starting out after a few seconds it does downshift to first with a jolt?  Being in too high a gear would account for the slow acceleration and the downshift would be the jolt.  Staying in too high a gear would make a shudder maybe. It did in my old stick shifts .
    • Do you know the name of the guy, CigarGuy?  I'm guessing the answer is "Yes", but I've had a couple of beers.
    • seeing I will not have a bonus tag the does are safe at Ripley but a buck will need to be wall hanger before I shoot 
    • You did not identify the model of your Garmin  sorta important when wiring. If your Garmin is a Striker, than the other two wires brown and blue are not used. Also note the date on the install instructions. The ones dated before March 2016 did not include the wiring information.   This site might have some answer. http://www.gpscity.com/questions?qid=56118
  • Our Sponsors