KING Posted April 21, 2003 Share Posted April 21, 2003 I am having a trim problem. The trim is stuck all the way down in my garage, so I cannot even get the thing out of the garage without hitting the skeg and prop on the cement slab. Is there a way to manually get the motor up so I can get it out? Link to comment Share on other sites More sharing options...
0 Scenic Posted April 21, 2003 Share Posted April 21, 2003 King,Looking at the motor from the back, on the bottom right side of the trim pump there is a screw that you access thru the motor mount housing from the side. Open that screw up and you will be able to lift your motor. You can lift it up and then tighten the screw back down and it will stay in that position.Jeff Scenic Tackle Link to comment Share on other sites More sharing options...
Question
KING
I am having a trim problem. The trim is stuck all the way down in my garage, so I cannot even get the thing out of the garage without hitting the skeg and prop on the cement slab. Is there a way to manually get the motor up so I can get it out?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts